User manual SONY PCWA-DE50

[. . . ] In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, this equipment has to be installed and operated while maintaining a minimum body to antenna distance of 20 cm. Based on continuous exposure of 30 minutes. Users are not permitted to make changes or modify the system in any way. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Tipping or falling could result in injury. · When using wall mounting, make sure that the wall is strong enough to support the Wireless Unit. The Wireless Unit could fall if the wall is not strong enough, leading to unforeseeable accidents. Further, be careful not to drop the unit or the tools used for mounting it. Doing so could result in unforeseeable accidents. · Avoid locations that are directly exposed to sunlight or heaters. Internal overheating could result in fire or damage to the unit. · Make sure connectors are properly connected. ­ Do not insert any metallic objects inside the connectors. Short-circuiting the pins could cause fire or damage to the unit. ­ Be careful to insert connectors squarely. Crooked insertion could cause pins to shortcircuit, possibly causing fire or damage to the unit. · Use only the supplied Power Unit with your Sony Wireless LAN Converter. To disconnect your Wireless LAN Converter from the power supply, unplug the Power Unit. · ISDN and telephone lines cannot be connected to the Wireless Unit connector and/or NETWORK connector of the Power Unit. If the Power Unit is connected to the network or telephone lines mentioned below, high electric current to the connectors may cause damage, overheating or fire. Connecting to home or business-use telephone lines is strictly prohibited. ­ Telephone lines ­ PBX (private branch exchange) ­ Home or business-use telephone lines ­ Lines other than those mentioned above. · Do not connect the Wireless LAN Converter to a hub as this affects the correct operation of the Converter. Getting help This section describes how to get help and support from Sony, as well as troubleshooting tips for your Wireless LAN Converter. Access Point Scan Utility Online Help explains how to scan the Access Point. The Sony Wireless LAN Converter support Web site http://www. sony. com/wirelesslansupport provides the latest information on your Wireless LAN Converter. The Sony e-mail support service answers your questions by electronic mail. Just send your question in an e-mail message and a customer service representative will reply. To send a question to Sony e-mail support, fill out the email form at http://www. ita. sel. sony. com/ support/pc/email. html. [. . . ] For details, refer to the separate Quick Start Guide or Online Help. 3 LINK/ACT indicator Lights up when a link has been established through the NETWORK connector 0. While data are being exchanged, the indicator flashes. 4 Wireless Unit cable Connect to the Wireless Unit connector 9 on the Power Unit. [. . . ]