User manual SONY CLIE PEGA-BC10 CHARGING A BUILT-IN BATTERY USING ADAPTER

[. . . ] Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. Owner's Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. [. . . ] ·When you recorded from an analog source and therefore the MD contains only one track number ·When you want to put markings in a track to find particular points After you divide a track 3 Press ENTER/YES. "All Erase??" appears in the display. 4 Press ENTER/YES again. When all recorded tracks, the disc name, and titles on the MD have been erased, "Complete" appears for a few seconds. To stop before all tracks, the disc name, and titles have been erased Press . Track C moves to track position 2. POWER m ON 3 1 Erasing part of a track By using the divide, erase, and combine functions, you can erase specific portions of a track. Example: Erasing a part of track A Track number Dividing Part to be erased 1 3 A B C A is divided into 3 parts. 1 Combining 4 A#1 B C #1 and #3 are combined. 1 3 2 C A(#1+#3) B 2 #3 3 TRACK MD The total number of tracks on the MD increases by one and all tracks following the divided track are renumbered. Example: Dividing track 2 to create a new track for C Track 1 2 3 number A B C D Dividing 1 23 4 A B C D Track 2 is divided, creating a separate track for C, and all the following tracks are renumbered. 4, 6 1 Press MD. 2, 5 , , The unit enters MD play mode. 2 2 Turn the JOG dial until the track number you want to move appears in the display. For example, if you want to move 7th track to 1st, turn the JOG dial until 7th track appears in the display. 12345 6 7 8 9 10 11 VOLUME POWER m ON Erasing 2, 4 Track number you want to move Music calendar 3 Press EDIT/NO repeatedly until "Move ?" appears in the display. 3, 6 1 5 , , Moving Recorded Tracks (move function) You can change the position of any track. After you move a track, the tracks between the new and old track positions are automatically renumbered. 4 Press ENTER/YES. 5 Turn the JOG dial until the new track number appears. TOC EDIT MD 1 While playing the MD, press fl at the point where you want to create a new track. The deck pauses playing. 12345 6 7 8 9 10 11 VOLUME New track number Track number you want to move 2 Press EDIT/NO repeatedly until "Divide ?" appears in the display. 3 Press ENTER/YES. "Rehearsal" alternates with "Position ok?" in the display, and the starting portion of the new track begins playing repeatedly. 6 Press ENTER/YES. After you have moved the track, "Complete" appears for a few seconds. Note that once erased, titles cannot be recovered. 1 While the deck is stopped, press EDIT/ NO repeatedly until "Name Erase?" appears in the display. "Name Erase ??" appears in the display. All titles are erased. 12345 6 7 8 9 10 11 VOLUME To enter a space quickly Press ) while the cursor is flashing. 7 Press TOC EDIT ). The cursor shifts rightward and stands by for the input of the next character. 12345 6 7 8 9 10 11 VOLUME DISC MD Next character 8 Repeat steps 5 and 7 until you have entered the entire title. If you want to enter the same type of character, skip step 5. If you entered the wrong character Press ) or 0 until the character to be corrected starts flashing, and repeat steps 5 to 7 to enter the correct character. To erase a character Press ) or 0 until the character to be erased starts flashing, then press EDIT/NO. 9 Press ENTER/YES. This completes the labelling procedure and the title scrolls in the display. To stop before the track has been labelled Press . To check the titles You can check the disc or track name by pressing SCROLL. To check the Press SCROLL* Disc name Track name While the deck is stopped While the deck is playing * Press SCROLL again to pause, and once more to continue scrolling. Chapter 5: Editing Recorded MDs 21 Chapter 6: the Radio Listening to the Radio Presetting Radio Stations Playing Preset Radio Stations Listening to the Radio You can have the tuner automatically scan and tune in the stations with clear signals. This feature saves you time in searching for stations with clear signals. However, you will have to manually tune in the stations with weak signals that are skipped by automatic tuning. POWER m ON "TUNED" appears in the display. [. . . ] Set the clock and timer settings again. Timer The timer does not function. While the timer works, press the POWER switch to turn off the system. m Make sure "DAILY" or "REC" appears in the display. Remote The remote does not function. m There is an obstacle between the remote and the system. [. . . ]