User manual SONY CLIE PEGA-SA10

[. . . ] Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the battery to excessive heat such as direct sunlight, fire or the like. Hereby, Sony Corp. , declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [. . . ] " appears. Creating your own program (Program Play) 1 Select the desired function. CD Press CD to select the CD function. USB Press USB to select the USB function. Other Operations 5 6 2 3 Press PLAY MODE repeatedly until "PGM" appears while the system is stopped. Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. Example: When programming tracks on a CD Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. To play your program of tracks or files, press . The program remains available until you open the disc tray or remove the USB device. To play the same program again, press . To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the system is stopped. To delete the last track or file of the program Press CLEAR while the system is stopped. Selected track or file number Total playing time of program (including selected track or file) GB Presetting radio stations You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number. Use buttons on the remote to preset stations. 6 To call up a preset radio station, press TUNING MODE repeatedly until "PRESET" appears, and then press +/ repeatedly to select the desired preset number. 1 2 Tune in the desired station (see "Listening to the radio" (page 14)). Press TUNER MEMORY . Preset number 3 Press +/ repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 4 5 Press ENTER . Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 6GB Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. The indicator will turn off after about 40 seconds. 2 Find your problem in the checklist If the STANDBY indicator flashes Immediately unplug the power cord, and check the following items. If your system has a voltage selector, is the voltage selector set to the correct voltage? Are you using only the supplied speakers? Is anything blocking the ventilation holes on the top or back of the system?After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. General Sound comes from one channel, or the left and right volumes are unbalanced. Place the speakers as symmetrically as possible. Connect only the supplied speakers. CD/MP3 player The sound skips, or the disc will not play. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. GB Play does not start from the first track. [. . . ] 145 × 300 × 200 mm Mass: Approx. 2. 6 kg net per speaker General Power requirements: 220 240 V AC, 50/60 Hz Power consumption: 50 watts Dimensions (w/h/d) (excl. 285 × 120 × 215 mm Mass (excl. speakers): 2. 7 kg Supplied accessories: Remote Commander (RM-SCU35) (1), R6 (Size AA) batteries (2), AM loop antenna (1), FM lead antenna (1), Speaker pads (8) Design and specifications are subject to change without notice. Standby power consumption: 0. 5 W Halogenated flame retardants are not used in the certain printed wiring boards. [. . . ]