User manual SONY PEGA-SC500

[. . . ] 3 In the drop down menu, select Serial Port and click the serial port number connected to the serial cradle. Push the HotSync button to make sure data synchronization (HotSync) is possible between the CLIE handheld and your computer. Specifications Serial Cradle Dimensions Approx. 2 7/8 × 2 7/8 × 3 1/8 inches (w/h/d) (Approx. [. . . ] After PictureGear Lite is uninstalled successfully, reinstall PictureGear 4. 2 Lite from the supplied 8 cm (3 in. ) CD-ROM. 1 Click the Windows Start button, click Settings, and then click Control Panel. Control Panel will appear on the screen. Choose PictureGear 4. 2 Lite in the dialog box on the Install/Uninstall tab. The dialog box will ask if you want to Remove PictureGear 4. 2 Lite 5. Uninstall will start. · · · · · 1 When the installer does not run Depending on you computer's settings, the PictureGear installer may not start when you insert the 8 cm (3 in. ) CD-ROM in your CD-ROM drive. In this case, run the installer by following procedure below: Notes on use · Do not place the unit in locations that are: ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Vibrating ­ Strong magnetic fields ­ Sandy ­ Exposed to direct sunlight · Do not apply mechanical shock or drop the unit. · Unplug the AC Adapter from the AC outlet when not in use for a long time. · Be sure that nothing metallic comes into contact with the metal parts of this unit. If this happens, a short circuit may occur and the unit may be damaged. · Do not operate the unit with a damaged cord or if it has been dropped or damaged. · Always keep the metal contacts clean. · Do not disassemble or convert the unit. · While the unit is in use, it gets warm. · Keep the unit away from TV or AM receivers, as it will disturb reception. 1 2 Click the Windows Start button and click Run. The Run dialogue box will appear on the screen 1 When the dialogue box appears, click Browse, select X:\Setup. exe, then click OK. (X is the CD-ROM drive name in use. ) The installer is started. Before use By using the serial cradle, you can synchronize your data using the HotSync® operation with computers running Microsoft® Windows® 95/ Windows 98/Windows 98 Second Edition/Windows 2000 Professional. To start PictureGear Lite: Click the Windows Start button, click Program, and then click PictureGear 4. 2 Lite. [. . . ] · After playing, store the disc in its case. Stacking discs without cases or leaving the disc exposed, may cause the disc shape to warp. If Palm Desktop for Sony software is already installed: Connect the serial cradle to the serial port of the computer. On cleaning · Dirt from a fingerprint or dust causes picture noise or declining sound quality. · Clean the disc with a cleaning cloth. [. . . ]