User manual SONY CLIE PEGA-SC500 USING SERIAL CRADLE WITH PEG-S360

[. . . ] And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. [. . . ] The tape deck stands by for recording and the CD player pauses for playback. 4 5 Press DIRECTION repeatedly to select "g" to record on one side or "h" (or "j") to record on both sides. Press TAPE/nN repeatedly to select the recording side. If you select both sides recording or front side recording, press TAPE/nN until "N" appears. If you record on the reverse side, press TAPE/nN again until "n" appears. 6 Press z REC PAUSE/START. Recording starts. When the recording is completed, the CD player and the tape deck stop automatically. To stop recording Press x. 16GB Note Recording on a tape manually -- Manual Recording You can record just the portions you like from a CD on a tape. Use buttons on the unit for the operation. When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. 1 2 Tape ­ Recording Load a recordable tape. Select the desired source to record. · TUNER: To record from this system's tuner. · CD: To record from this system's CD player. · MD or VIDEO: To record from the optional component connected to the MD/VIDEO jacks. 3 4 5 Press z REC PAUSE/START. "REC" flashes and "N" appears and the tape deck stands by for recording. Press DIRECTION repeatedly to select "g" to record on one side or "h" (or "j") to record on both sides. Press TAPE/nN repeatedly to select the recording side. If you select both sides recording or front side recording, press TAPE/nN until "N" appears. If you record on the reverse side, press TAPE/nN again until "n" appears. 6 Press z REC PAUSE/START, then start playing the desired source to record. Recording starts. Other operations To Do this Stop recording Pause recording Tip Press x (TAPE stop). Press . /> repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. · If you use Rec Timer and Sleep Timer at the same time, Sleep Timer has priority. · Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, Rec Timer will not be activated. · The volume is reduced to minimum during recording. · Note that if Rec Timer is set at the same time as Play Timer sound source is set to tape, Rec Timer sound may be recorded onto the tape. · You cannot activate Play Timer and Rec Timer simultaneously. Rec Timer settings and the desired station appear, then the original display returns. 6 7 8 Load a recordable tape. Press DIRECTION on the unit repeatedly to select "g" to record on one side or "h" (or "j") to record on both sides. Press N (or TAPE/nN on the unit) repeatedly to select the recording side. If you select both sides recording or front side recording, press N (or TAPE/nN on the unit) until "N" appears. If you record on the reverse side, press N (or TAPE/nN on the unit) again until "n" appears. 9 Press ?/1 to turn off the system. 20GB Display Turning off the display -- Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. To cancel Power Saving Mode Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. When a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. Checking the remaining time and titles (CD/MP3) Press DISPLAY repeatedly during playback. Press DISPLAY while the system is off. [. . . ] ­ Discs that have labels printed using a special ink that feels tacky when touched. · Discs with non-standard shapes (e. g. , heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. On placement · Do not place the system in an inclined position. [. . . ]