User manual SONY CLIE PEGA-UC60K

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. The instructions in this manual are for model CLIE PEGA-UC60K. You can also use the controls on the remote if they have the same or similar names as those on the player. â· The following icons are used in this manual: Indicates that you can do the task using the remote. [. . . ] Each time you press the button, the disc name or artist name appears in the display. Before you start playing Playing track number and remaining time of the current track Channel information (appears only when the player detects a Multi-channel Super Audio CD) Total number of tracks and total playing time Each time you press DISPLAY MODE on the remote while playing a disc, the display turns off and on alternately. Even when the display is turned off, the display turns on if you pause or stop play. When you resume play, the display turns off again. Before you start playing, when you press DISPLAY MODE to turn off the display, "DISPLAY OFF" appears, and when you press the button to turn on the display, "DISPLAY ON" appears. If the disc name has more than 15 characters, the first 14 characters will remain after the name scrolls by in the display. When the player detects a Multi-channel Super Audio CD, the channel information appears before the playing time of the current track appears. You can change the displayed language if the TEXT disc has multi language capacity. When the player detects such a TEXT disc, "TEXT" and "MULTI" appear in the display. Turn l AMS L until "LANGUAGE" appears in the display. If the player cannot display the language used in a TEXT disc, "Other Lang" appears in the display. /> (or turn l AMS L) to select the desired track in stop mode. Press and hold m/M to set the time to start play while looking at the display. You can set the time from the beginning of the desired a track when you press M at first, and set the time from the end of the desired track backward's when you press m at first. If you turn off the player or disconnect the mains lead, the player will store the last setting of repeat play ("Repeat All" or "Repeat 1") and recall it the next time you turn on the player. However, the setting of the Repeat A-B Play will be cancelled if you turn off the player or disconnect the mains lead. "REPEAT" appears in the display and Repeat All Play starts. The repeat play changes depending on the play mode you select. Each time you press the button, the last track of the programme is erased. /> to select the track you want to add, then press PROGRAM. When using the remote, press the number button of the track to be added. Hold down CLEAR or x (for about 2 seconds) until "Prog CLEAR" appears in the display. [. . . ] Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. Do not use a disc with a seal attached on such as on a used disc or rental disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts. â· After playing, store the disc in its case. [. . . ]