User manual SONY CLIE PEGA-VR100K RECORDING TV PROGRAMS MANUALLY

[. . . ] ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ⭠Consult the dealer or an experienced radio/TV technician for help. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of the FCC Rules. For technical support, please visit http:// www. [. . . ] Connect the Portable HardDisk Media to the unit, then secure with the screw at the back of the unit. Finally, connect the power cord to the power outlet. Make sure that the power outlet is close to the unit and readily accessible. The shape of the power cord varies depending on the country or region of purchase. ⷠWhen using the drive with the 6-pin to 4-pin IEEE 1394 cable, you must connect the AC adaptor and power cord to the unit. This is not necessary when using a 6-pin to 6-pin IEEE 1394 cable. Then, connect the cable to a IEEE 1394 port of your computer. Note A default device driver is installed the first time you use the unit. You can use the unit without having to install a device driver. You can use the unit with the default device driver of your operating system. Your Windows operating system automatically detects the unit and you can start using it immediately. You cannot use the unit with operating systems that do not support it. CDepending on the status of your computer, it is possible that it may not detect the unit. In this situation, visit the troubleshooting Web page at http://www. C If you connect the unit to an IEEE 1394 hub, the unit may not function properly, depending on your hub. We recommend that you connect the unit directly to your computer. C When using the unit at the same time as other IEEE 1394 devices, the unit may respond more slowly than usual. C If you connect the unit to a daisy chain, the unit may not function properly. We recommend that you connect the unit directly to your computer. C One or several programs using the unit may still be running. Quit any such program before attempting to disconnect the unit. C This is not indicative of damege c Depending on your computer, turning it on while the unit is still connected may prevent Windows from starting. [. . . ] ⷠDo not store the unit or Portable HardDisk Media in direct sunlight, humid locations, hot locations, or locations subjected to strong vibrations. ⷠAvoid moving the unit and Portable HardDisk Media during use as this may cause them to malfunction. If you move the unit and Portable HardDisk Media from a cold to a warm environment or the ambient temperature rises suddenly, do not use them immediately as condensation may have formed inside them. If this occurs while you are using the unit and Portable HardDisk Media, suspend use for an hour or more, then deactivate them. [. . . ]