User manual SONY CLIE PEGA-WL110

[. . . ] Refer to this number whenever you call your Sony dealer regarding this product. ____________________ If you have any questions about this product, you may call; Sony Customer Information Service Center 1-866-654-SONY(7669) or http://www. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The use of optical instruments with this product will increase eye hazard. [. . . ] The images may come from a CD-R or a "Memory Stick" media inserted in the CLIE PEGA-WL110, or from a digital still camera connected to it. notes · Only still images in Baseline JPEG (EXIF) format can be viewed. The CLIE PEGA-WL110 cannot reproduce images in other formats or play back video files. You may experience problems viewing JPEG files other than those taken with a digital still cameras (Exif files). You may experience problems viewing images of 6 megapixels or greater. Turn on the television and set the TV/Video selector to "Video". Note The selection method of the video input may differ depending on your television model. Hold down the POWER button for at least 2 seconds to turn the CLIE PEGA-WL110 on. Prepare the media containing the digital images you want to view. To view digital images contained on a CD-R, insert the CD-R into the CLIE PEGA-WL110. To view digital images contained on a "Memory Stick" media, insert the "Memory Stick" media into the Memory Stick slot on the CLIE PEGA-WL110. The method for copying data is different, depending on the type of media or device that is used as a source. You can find the latest information about compatible USB storage media at: http://www. Use the following procedure to configure the CLIE PEGA-WL110 to perform this verification automatically when copy ends. If you are unable to perform this verification from your computer, for example, we recommend verifying the integrity of your data this way. Note Verifying the integrity of the data takes approximately as long as the copy itself. Press the POWER button for more than two seconds. Perform the following procedure before inserting a CD-R or connecting any type of media to the CLIE PEGA-WL110. Press the ENTER button for more than two seconds. The QUICK setting starts data integrity verification after the copy is complete, allowing the copy to be completed faster than with the VERIFY setting. The "V" mark appears at the top of the display window, indicating that data is automatically verified when copy ends. While displaying digital images stored on a media connected to or inserted in the CLIE PEGA-WL110, you can access various functions for controlling the display and adjusting the image shown on the television. [. . . ] C If data has already been written to the disc, there may not be sufficient free capacity. Use a new disc or a disc with sufficient free capacity. Problems with displaying digital images on a television The media with digital images is not detected automatically. C Disconnect any other storage media connected to the CLIE PEGA-WL110, and then insert the media containing the digital images that you want to display on your television screen. [. . . ]