User manual SONY PEG-AGC10

[. . . ] Record the lot number in the space provided below. Refer to the model and lot numbers when you call your Sony dealer regarding this product. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation. [. . . ] 2 Copy the file of the game you want to try on your PC from [¥3rdparty¥Games] in the CD-ROM. 3 Install the game application on your CLIÉ handheld, following the instructions for your CLIÉ handheld. Setting the Key Emulation Attaching the Game Controller to your CLIÉ handheld 1 Attach the Game Controller to the CLIÉ handheld, as if to put it onto the CLIÉ handheld, as shown. Press down firmly. Tap the check box of [Enable Key Emulation] to tick the item on the General settings screen. This allows the applications that are assigned to each button of this unit to start. Note If the game does not work correctly, tap the check box of [Enable Key Emulation] to remove the checkmark on the item and see if the game works correctly. Carrying your CLIÉ handheld with the Game Controller attached Slide the HOLD switch to the right to set the HOLD function on the Game Controller. The Game Controller does not accept any key operations and prevents inadvertent operation. Note For details on the supplied game applications, contact the manufacturer of each game application. Specifications The grafitti area should be covered by the Game Controller. Input Power consumption When you have a Flip&Rotate style CLIÉ handheld Attach the Game Controller by sliding it alongside your CLIÉ handheld, as shown. Note The Game Controller cannot be attached to the Flip&Rotate style CLIÉ handheld when it is set to the opened style. To use the Game Controller with a Flip&Rotate style CLIÉ handheld, set the CLIÉ handheld to the turned style. HOLD OFF HOLD ON When you use the Game Controller again, slide the HOLD switch to the left to cancel the HOLD function. Note When you do not use the Game Controller, remove it from the CLIÉ handheld. DC 3V 7. 5 mW (during normal operation) 0. 24 mW (with HOLD function set) Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Dimensions 3 5/8 × 29/32 × 1 11/16 inches (89 × 22. 5 × 42. 5 mm) (w/h/d) (Excluding the largest projecting part) Mass. 2 3/8 inches (60 mm) (1 3/16 inches (30 mm) at the factory settings) Accessories Installation CD-ROM Case Strap Location of controls X key HOME key MENU key Y key Design and specifications are subject to change without notice. 2 Hook up the connector of the Game Controller to the interface connector of the CLIÉ handheld. Notes on use · Do not subject the unit to: ­ Extreme heat or cold ­ Dust, dirt, or sand ­ High humidity ­ Vibration ­ Strong magnetic fields ­ Mechanical shock ­ Direct sunlight (for extended periods of time) · Do not drop the unit. · Be sure that nothing metallic comes into contact with the metal parts of this unit. If this happens, a short circuit may occur and the unit may be damaged. · Do not operate the unit if it has a damaged cord or if it has been dropped or damaged. · Always keep the metal contacts clean. · Do not disassemble or convert the unit. · While the unit is in use, it gets warm. Cleaning Clean the unit with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish. Interface connector f/F/g/G keys HOLD switch A key B key * The functions of the keys may vary depending on games. 3 Attach the drop-prevention strap to the Game Controller and CLIÉ handheld. Changing the key assignment According to the game you play, you can assign the functions of the buttons and Jog DialTM navigator of your CLIÉ handheld to the keys of the Game Controller. At the factory default presetting, the functions are assigned as follows. [. . . ] La manette de jeu (Game Controller) est alors prête à être utilisée. Procédez à l'installation de l'application de jeu sur votre ordinateur de poche CLIÉ à partir du CD-ROM d'installation fourni, comme indiqué ci-dessous. Pour tous détails concernant la façon de jouer, reportez-vous aux instructions contenues dans le CD-ROM d'installation. Si vous n'utilisez pas la manette (Game Controller) temporairement 1 Insérez le CD-ROM d'installation fourni dans le lecteur de CD-ROM du PC. Le premier écran d'installation apparaît. Mise en place de la manette (Game Controller) sur l'ordinateur de poche CLIÉ 1 Fixez la manette (Game Controller) à l'ordinateur de poche CLIÉ en le plaçant sur ce dernier, comme illustré. Appuyez fermement. Effleurez la case de [Enable Game Controller] pour décocher l'option sur l'écran de paramétrage. 2 Cliquez sur [English]. L'écran du programme d'installation apparaît. Réglage de l'émulation des touches Effleurez la case de [Enable Key Emulation] pour cocher l'option sur l'écran de paramétrage. Ceci permet aux applications affectées à chaque touche de cet appareil de démarrer. Remarque Si le jeu ne fonctionne pas correctement, effleurez la case de [Enable Key Emulation] pour supprimer la coche sur l'option et vérifiez si le jeu fonctionne correctement. 3 Cliquez sur [Install Game]. Le sous-menu du programme d'installation apparaît. 4 Installez le logiciel en suivant les instructions apparaissant à l'écran. Si vous avez enregistré plusieurs utilisateurs, sélectionnez un nom d'utilisateur dans la liste des utilisateurs. 5 Cliquez sur [Done]. [. . . ]