User manual SONY PEG-AVR100K

[. . . ] 4-679-184-11(1) Video Recorder Operating Instructions PEGA-VR100K 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. This Class B digital apparatus complies with Canadian ICES-003. [. . . ] In the next step, you will perform the HotSync operation to carry out the installation to your CLIÉ handheld. 6 Execute a HotSync operation on your CLIÉ handheld. The HotSync operation starts and Video Utility is installed on your CLIÉ handheld. For details on how to perform a HotSync operation, refer to "Read This First (Operating Instructions)" in the supplied instruction manual of CLIÉ handheld. Note When you update the system for playing movies, click [CLIÉ Software] from the categories displayed on the left side of the Install CD-ROM window, then click [Install] for "Movie Player Software Update Program" and follow the on-screen instructions to install it. Setting the tuner and channel Before you use the Video Recorder, set the tuner and channel on your CLIÉ handheld. These settings are then automatically transferred to the Video Recorder when the "Memory Stick" media containing these settings is inserted. Note In the default setting, all channels are displayed in the front panel display. 1 Insert a "Memory Stick" media into your CLIÉ handheld. 22 2 Tap (Video Util) on the CLIE Launcher. The welcome message on the Video Utility screen is displayed. Basic Hookups and Settings Note (Video Util) for the first time, a welcome message appears on When you tap the screen. From the next time, whenever you need to make tuner and channel settings, tap at the bottom of the Video Utility screen and display the Video Utility screen for [Setup]. 3 Tap [Next]. The Video Utility screen for [Setup] is displayed. 4 Select [Cable] or [Air] (broadcast signal) in the list box next to [Antenna]. continued 23 5 Tap [Channels]. The Available channels screen is displayed. 6 Tap a channel you want to receive by changing the Available channels screen. to in When you change to here, the channels you select are displayed in [Channel] in the Video Utility screen for [New Preset] and also in the front panel display of the Video Recorder. Note Unselected channels will not appear in the front panel display of the Video Recorder, nor as channel options in the Video Utility screen. Make sure to put a checkmark before every channel that you want to use. 7 Tap [OK]. The Video Utility screen for [Setup] is displayed. 8 Tap [OK]. The tuner and channel settings are complete. 24 9 Remove the "Memory Stick" media from your CLIÉ handheld. Note Do not remove the "Memory Stick" media from your CLIÉ handheld while the "Memory Stick" LED is lit. 10 Press 1 (power) on the Video Recorder. Basic Hookups and Settings The Video Recorder turns on, and the POWER indicator blinks momentarily and then stays lit in green. 11 Insert the "Memory Stick" media into the "Memory Stick" slot of the Video Recorder. When you insert the "Memory Stick" media containing the tuner and channel settings, the Video Recorder automatically reads them and adjusts the appropriate settings. When the Video Recorder is finished, the "Memory Stick" media indicator turns off. Insert a "Memory Stick" media with the arrow up and facing the Video Recorder. Notes · Do not remove the "Memory Stick" media from the Video Recorder when the "Memory Stick" media indicator is lit. It is possible that all data on the "Memory Stick" media may be erased or a malfunction may occur. · When removing a "Memory Stick" media, push it in slightly and then release. The "Memory Stick" media will pop out of the slot. The initial setup is complete! 25 Operations Setting a Timer REC Preset You can set, edit, or delete a timer REC preset using Video Utility. You can also set the same timer REC preset on other "Memory Stick" media. Note The Video Recorder performs timer recordings using timer REC preset settings specified on a "Memory Stick" media. To record, insert the "Memory Stick" media containing the timer REC preset information into the Video Recorder. Guide to the Video Utility screen When you tap (Video Util) on the CLIE Launcher, the Video Utility screen is displayed. 1 9 2 3 8 4 5 7 6 26 1 Tap here to display a drop-down menu. Select "REC Time", "Title", or "REC Mode" (recording mode and sound). 2 Displays the timer REC presets in the backup list of your CLIÉ handheld. 3 When you tap [Add preset], you can add a timer REC preset from the backup list of your CLIÉ handheld to the "Memory Stick" media. 4 Displays the timer REC preset on the "Memory Stick" media. 5 When you tap , the Video Utility screen for [Setup] is displayed. Use this screen to make the antenna settings. 6 When you tap , the Memory Stick Info screen is displayed. The storage space of the "Memory Stick" media and the recordable time for the "Memory Stick" media in each recording mode (REC Mode) is displayed. 7 When you tap [New], the Video Utility screen for [New Preset] is displayed. Use this panel to set a new timer REC preset. 8 Displays the recordable status of the "Memory Stick" media, depending on the data capacity of the "Memory Stick" media. [. . . ] c Remove the "Memory Stick" media and reinsert. If the error message still appears, format the "Memory Stick" media using CLIE Files. The "Memory Stick" media is write protected. c Release the write protect tab of the "Memory Stick" media. [. . . ]