User manual SONY PEG-T615C WAC V1.0

[. . . ] However, SONY bears no other responsibility. · The software provided with this player cannot be used with equipment other than that which it is designated for use with. · Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice. [. . . ] If the Add-on folder is not selected, select it manually. At the default setup, the Add-on folder is stored in the Sony Handheld folder of the Program Files folder. 5 6 7 8 Double-click the WAC folder. Double-click WAC_enUS. prc. WAC_enUS. prc is added to the File Name list. Click Done. Press the HotSync button on the cradle. The file specified in step 6 is installed on your CLIÉ handheld during the HotSync operation. 5 Using the World Alarm Clock Viewing world time 1 On the Application Launcher screen, rotate the Jog DialTM navigator to select WA Clock and then press the Jog Dial navigator. Or, tap the WA Clock icon on the Application Launcher screen. The World Alarm Clock application starts and the clock screen is displayed. Elements of the clock screen The clock with the time and date of your present time zone (all of which you set for your CLIÉ handheld) Set Alarm icon: If an alarm is set, the icon will be marked black. Time line with the date The clock for different time zones (To select the time zones you wish to view here, see "Selecting other time zones to be displayed" on page 7. ) Daylight Saving Time icon: Tap to change the indicated time to daylight saving time (the shade of the icon changes). Tap again to return to former indication. Note The World Alarm Clock application displays the time according to the time setting for the CLIÉ handheld. Make sure you set the correct date and time in the CLIÉ handheld's Date & Time Preferences screen. For details, refer to Chapter 5 of the Operating Instructions manual. 6 Using the World Alarm Clock Selecting other time zones to be displayed You can select up to three areas to be displayed other than your present location. The time and date for these other areas will be displayed on the lower half of the clock screen. 1 On the clock screen, tap the area name (the default setting is "USA (Pacific)") for the smaller clock on the lower half of the screen. The Set Time Zone screen appears. 2 Tap to select the time zone, and tap OK. Setting the clock alarm You can set up to five alarms. To set an alarm for other days or days of the week, set an alarm within the Date Book. See "Editing Date Book events" in the Operating Instructions manual for details. 1 On the clock screen, tap the Set Alarm Alarm mark. icon next to the The Set Alarm screen appears. If you already have an alarm set on the selected number, the Set Alarm screen for the last set alarm will be displayed. Set Alarm icon 2 3 Tap the arrow V next to Off, and select On. On the Comment line, enter a note that you would like to attach to the alarm. Continued on next page 7 Using the World Alarm Clock 4 Tap the Time box. The Set Time screen appears. 5 Set the time. 1 Tap the hour box and tap the arrow v or V to set the hour. 2 Tap the minute box and tap the arrow v or V to set the minute. [. . . ] The deactivated alarms will have no black dots in their circle. Note If you select Off for Alarm Sound/Vibrate Alarm/LED Alarm in the General Preferences screen, the sound/vibration/LED of the alarm will be deactivated even if you have selected Alarm On here. Stopping the alarm When the alarm goes off, a dialog screen appears. To turn off the alarm and close the screen, tap OK. To have the alarm stop and go off again after a few minutes, tap Snooze. If you do not turn off the alarm The alarm goes off again according to what you set for Remind Me in step 9 on page 9. If you tap Snooze An alarm goes off approximately every 5 minutes until you stop the alarm. 10 World Alarm Clock menu items The following item appears when you tap the MENU icon. [. . . ]