User manual SONY PHDA55

[. . . ] 3-866-612-12(1) Parts identification Surface STANDBY lamp The STANDBY lamp lights up while the power is turning on and when the display is turned off. LCD screen (Control panel) ACCESS lamp The ACCESS lamp lights up red while the unit is accessing the Memory Stick. Caution When the ACCESS lamp is flashing, never remove the Memory Stick. Memory Stick slot Digital Photo Frame Operating Instructions Owner's Record The model and serial numbers are located on the rear. [. . . ] · Areas subject to strong magnetic fields or near magnets. Keep the unit away from speakers, television sets, etc. as permanent erasure of Memory Stick data may result. Notes on use · Do not operate the unit in locations where strong radio signals or other radiation is generated as displayed images may be adversely affected. · Do not drop or otherwise allow any mechanical shock to the unit. · Do not operate the unit near television sets or AM radio receivers as this unit may cause interference. · Do not allow metal objects to make contact with the metal parts of the unit or connecting plate as a short may occur resulting in damage to the unit. · Do not operate the unit in areas subject to direct sunlight as the touchless sensor may not operate correctly. On cleaning · Clean the unit with a soft cloth or tissue. · Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. · Clean the unit with a soft cloth slightly moistened with a mild detergent solution. · Do not use any type of solvent such as alcohol, benzine or thinner as it may mar the finish of the casing. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. For the customers in Germany Directive: EMC Directive 89/336/EEC. 92/31/EEC This equipment complies with the EMC regulations when used under the following circumstances: · Residential area · Business district · Light-industry district (This equipment complies with the EMC standard regulations EN55022 Class B. ) Warning and notice messages Various messages appear on the LCD screen. Message NO MEMORY STICK SYSTEM ERROR MEMORY STICK ERROR FORMAT ERROR MEMORY STICK LOCKED NO MEMORY SPACE Meaning/Remedy ·No Memory Stick has been inserted. ·Trouble is with the Memory Stick. ·Failed to format the Memory Stick. ·The tab on the Memory Stick is set to LOCK position. ·The Memory Stick is full, and cannot write the print marks. [. . . ] Select the number by pressing the control button, then press z to execute. When "D/M/Y" is selected, set the time on a 24-hour cycle. INDEX FORMAT ROTATE(90°) SLIDE SHOW PRINT MARK PROTECT DELETE OK FILE SETUP , SELECT SLIDE SHOW INTERVAL REPEAT START ON 3sec OFF CANCEL SELECT OK CLOCK SET Y/M/D M/D/Y D/M/Y ENTER CANCEL 1999/ 1/ 1 11:59PM SELECT/ADJUST OK 7 Select "ENTER" with the control button, then press z to start the clock. To cancel setting the date and time Select "CANCEL" with the control button, then press z. 4 Enter each item with the control button, then press z. INTERVAL: 3 seconds, 10 seconds, one minute, 15 minutes or one day. [. . . ]