User manual SONY PLM-A35

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. One blade of the plug is wider than the other for the purpose of safety and will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. You can use your Glasstron in any country or area with the supplied AC power adaptor within 100 V to 240 V AC, 50/60 Hz. [. . . ] Display unit to wall outlet Failure to properly fit the product (see "Proper Fit, " page 9) each time may result in eye fatigue, eye damage, or loss of visual functions and may result in accident or injury. This product should not be used by children age 15 or younger. The eyes of children are still developing and may be adversely affected by use of this product, and it may cause eye fatigue, eye damage, or loss of visual functions. In addition, this product may not be adjusted to fit a child's head. If you normally wear glasses while watching TV, you can use the Glasstron while wearing glasses. When you take the Glasstron off, be careful that your regular glasses not get caught on the Glasstron. Adjust the nose piece and put on the Glasstron. Pull out the nose piece if you wear glasses. Open the side pieces by grasping the side piece tips and put on the Glasstron. Caution: Be careful not to poke your eyes with the side piece tips when putting the Glasstron on or off. Adjust the angle of the side pieces by grasping the side piece tips to adjust the display unit to the most suitable viewing position. You do not necessarily have to rest the side pieces on your ears. the Glasstron includes two small (left and right) LCDs. You are watching a combined picture created from these two screens. Although the screen position is properly aligned at the factory, it may become misaligned if the Glasstron is deformed or damaged. Check the screen position alignment every time you turn on the Glasstron. If you cannot have correct screen alignment, stop using the Glasstron immediately. Turn on the Glasstron using the POWER ON/OFF switch. Correct The combined picture you see with both eyes You may see a horizontal line on the left screen rather than the right screen and vertical lines on the right screen rather than the left screen. If the image you see matches one of the pictures below, you have correct screen alignment. If the image you see matches one of the pictures below, stop using the Glasstron immediately. Use of the Glasstron under such conditions may cause eye fatigue or eye damage. [. . . ] Gently push until it clicks into position. However, reattaching the side pieces may cause a malfunction. Be careful not to reattach them too often. Do not place the product in locations subject to sudden temperature changes, or where it is excessively hot (above 96ºF/60ºC). [. . . ]