User manual SONY PLMS700

[. . . ] Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b]. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The AC power cord must be changed only at qualified service shop. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. [. . . ] Use the plug adaptor according to the equipment you want to connect. We recommend connecting the Glasstron to your video equipment using an S video cable and the audio/video cable to enjoy the highest quality pictures. In this case, you do not need to connect the video (yellow) plug. If you connect both the S video and video plugs, the S video signal is automatically selected. Power supply box VCR, Laser disc player, DVD player, camcorder, etc. Even if you use the supplied audio/video cable, the audio and video signals may not be carried to the Glasstron depending on the video source. In this case, contact your Sony dealer or local authorized Sony service facility. When you connect the Glasstron to the audio output jacks (phono jacks) of your video equipment, connect the Glasstron to both the right and left audio output jacks. If you connect the Glasstron to just one audio output jack, you will hear sound from only one of the stereo earphones. Connect the AC power adaptor AC-PLM2 (supplied) to a wall outlet. Do not connect the power source until all other connections are complete. If the Glasstron fit is loose or uncomfortable, place the supplied side piece pads onto the tip of each side piece. Use the side peace pads pocket-side inward. Detach the stereo earphones from the display unit and put them in your ears. If the stereo earphones are loose, we recommend using the spare ear-pads (not supplied). If your head is small, you may not be able to use the Glasstron. Depending on your eyesight, you may not be able to focus on the picture properly. If you set the user lock , unlock it (page 25). Be sure to follow the procedures in "Connecting the Glasstron" (pages 14-17) and "Wearing the Glasstron" (pages 18-20). Each time this product is used, adjustment screens will appear, requiring the viewer to properly fit the product. Preventing sound from escaping through the stereo headphones ­­ AVLS(Auto Volume Limiter System): Keeps down the maximum volume to protect your ear. You cannot turn up the volume beyon d the defined limit even if you try to turn it up. [. . . ] Unplug the product from the wall outlet before cleaning. Clean the product gently with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. Reinsert the nose piece to its position. [. . . ]