User manual SONY PRS-600RC QUICK START

[. . . ] Do not expose the batteries to excessive heat such as sunshine, fire or the like. CAUTION Battery pack If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions. Note on the power cord (mains lead) The power cord (mains lead) is designed specifically for use with this camcorder only, and should not be used with other electrical equipment. Do not disassemble. Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it. Do not short circuit and do not allow metal objects to come into contact with the battery terminals. [. . . ] However, DVD media containing AVCHD footage should not be used with DVD based players or recorders, as the DVD player/recorder may fail to eject the media and may erase its contents without warning. When you access the camcorder from the computer, use the built-in "PlayMemories Home" software. Do not modify the files or folders on the camcorder from the computer. The image files may be damaged or may not be played back. Operation is not guaranteed, if you operate the data on the camcorder from the computer. The camcorder automatically divides an image file that exceeds 2 GB and saves the parts as separate files. All image files may be shown as separate files on a computer, however, the files will be handled properly by the import function and the playback function of the camcorder or the "PlayMemories Home" software. Use the built-in "PlayMemories Home" software when you import long movies or edited images from the camcorder to a computer. If you use other software, the images may not be imported correctly. When you delete image files, follow the steps on page 42. To create a Blu-ray disc You can create a Blu-ray disc with a high definition image quality (HD) movie previously imported to a computer. To create a Blu-ray disc, the "BD Add-on Software" must be installed. 3 Select the image quality of the disc you will create. want to copy, and then select Remaining disc capacity Notes Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 17) Refer to the instruction manual supplied with the device connected. Sony DVD writer may not be available in some countries/regions. Creating a disc with DVDirect Express Connect your camcorder and the "DVDirect Express" DVD writer (sold separately) using the USB cable supplied with the DVDirect Express. 1 Connect the DVDirect Express to the (USB) jack of your camcorder with the USB cable of the DVDirect Express. Saving images with an external device After the operation is completed, select . To play back a disc in the DVDirect Express 1 To play back movies from the disc in the DVDirect Express on the TV screen, connect the DVDirect Express to the (USB) jack of your camcorder, and connect your camcorder to the TV (p. 2 Insert a created disc into the DVDirect Express. 3 Press the play button on the DVDirect Express. 2 3 Insert an unused disc into the DVDirect Express, and close the disc tray. Press (DISC BURN) on the DVDirect Express. Movies that have not yet been saved on any disc can be saved on the disc at this time. After the operation is completed, select . After the operation is completed, select . 1 GB Notes High definition (HD) and standard definition (STD) image quality movies will be saved on individual discs. If the total memory size of movies to be burnt by the DISC BURN operation exceeds that of the disc, disc creation stops when the limit is reached. The last movie on the disc may be cut off. Do not do any of the following when creating a disc. Turn off the camcorder Disconnect the USB cable or the AC Adaptor Subject the camcorder or the DVDirect Express to mechanical shock or vibration Eject the memory card from the camcorder Disc creation time to copy movies to the limit of the disc is about 20 to 60 minutes. [. . . ] 4 1/2 in. ) (w/h/d) including the projecting parts, and the supplied rechargeable battery pack attached PRS-600RC: 58 mm 56 mm 106. 5 mm (2 3/8 in. 4 1/4 in. ) (w/h/d) including the projecting parts 58 mm 56 mm 114 mm (2 3/8 in. 4 1/2 in. ) (w/h/d) including the projecting parts, and the supplied rechargeable battery pack attached Mass (approx. ) HDR-CX190E: 168 g (5. 9 oz) main unit only 212 g (7. 5 oz) including the supplied rechargeable battery pack HDR-CX200E/HDR-CX210E: 175 g (6. 2 oz) main unit only 217 g (7. 7 oz) including the supplied rechargeable battery pack PRS-600RC: 210 g (7. 4 oz) main unit only 252 g (8. 9 oz) including the supplied rechargeable battery pack Input/Output connectors A/V Remote Connector: Video and audio output jack HDMI OUT jack: HDMI mini connector USB jack: mini-AB/Type A (Built-in USB) (output only) LCD screen Picture: 6. 7 cm (2. 7 type, aspect ratio 16:9) Total number of pixels: 230 400 (960 240) Projector (PRS-600RC) Projection type: DLP Light source: LED (R/G/B) Focus: Manual Throw Distance: 0. 5 m (1. 6 feet) or over Contrast ratio: 1500:1 Resolution (output): nHD (640 360) Continuous projection time (when using the supplied battery pack): Approx. 70 min Others/Index General Power requirements: DC 6. 8 V/7. 2 V (battery pack) DC 8. 4 V (AC Adaptor) USB Charging: DC 5 V 500 mA/1. 5 A Average power consumption: During camera recording using LCD screen at normal brightness: HD: 2. 1 W STD: 1. 9 W Operating temperature: 0 C to 40 C (32 °F to 104 °F) Storage temperature: 20 C to +60 C (4 °F to +140 °F) AC Adaptor AC-L200C/AC-L200D Power requirements: AC 100 V - 240 V, 50 Hz/60 Hz Current consumption: 0. 35 A - 0. 18 A Power consumption: 18 W Output voltage: DC 8. 4 V* Operating temperature: 0 C to 40 C (32 °F to 104 °F) Storage temperature: 20 C to +60 C (4 °F to +140 °F) 1 GB Dimensions (approx. ): 48 mm 29 mm 81 mm (1 15/16 in. [. . . ]