User manual SONY QD-S32/T

[. . . ] · Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it. · Do not short circuit and do not allow metal objects to come into contact with the battery terminals. GB 2 · Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun. · Do not incinerate or dispose of in fire. · Do not handle damaged or leaking lithium ion batteries. [. . . ] Furthermore, the recording media may become unusable or image data may be damaged. · Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission. Notes on the LCD screen · The LCD screen is manufactured using extremely high-precision technology so over 99. 99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording. GB 9 · If water droplets or other liquids splash on the LCD screen and make it wet, immediately wipe off the screen with a soft cloth. Leaving liquids on the LCD screen surface can harm the quality and cause a malfunction. · Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction. Please use Sony genuine accessories If you use accessories manufactured by companies other than Sony, this could cause a camera trouble. · Using other manufacturers' camera cases with magnets could cause a power supply trouble. Before connecting, make sure that the device is exFAT-compatible. If connected to a device that is not exFAT-compatible, a format drive request may appear. Do not format the drive, or all data will be lost. (exFAT is the file system used by SDXC memory cards. ) x To remove the memory card Access lamp Make sure that the access lamp is not lit, then push the memory card in once. Note · Never remove the memory card/the battery pack when the access lamp is lit. This may cause damage to data or the memory card. GB 16 x When there is no memory card inserted Images are stored in the camera's internal memory (approximately 23 MB). To copy images from the internal memory to a memory card, insert a memory card in the camera, then touch t (Settings) t (Memory Card Tool) t [Copy]. x To remove the battery pack Battery eject lever Slide the battery eject lever. Be sure not to drop the battery pack. x Checking the remaining battery charge A remaining charge indicator appears on the LCD screen. High Low Notes · It takes about one minute until the correct remaining charge indicator appears. · The remaining charge indicator may not be correct under certain circumstances. · When [Power Save] is set to [Standard] or [Stamina], if you do not operate the camera for a certain period of time while the power is on, the LCD screen becomes dark, then the camera turns off automatically (Auto power-off function). · To keep clean battery pack terminal and prevent short-circuiting, place the battery pack in a plastic bag, etc. [. . . ] In this case, be sure to charge this rechargeable battery before using the camera. However, even if this rechargeable battery is not charged, you can still use the camera, but the date and time will not be indicated. Charging method of the internal rechargeable backup battery Insert charged battery pack in the camera, and then leave the camera for 24 hours or more with the power off. Eye-Fi card As of December 2010, Eye-Fi cards are sold in the U. S. A. , Canada, Japan and some countries in the European Union. [. . . ]