User manual SONY QD-S64

[. . . ] If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it. Do not short circuit and do not allow metal objects to come into contact with the battery terminals. [. . . ] Do not use the camera near a location that generates strong radio waves or emits radiation. Otherwise, the camera may not properly record or play back images. Using the camera in sandy or dusty locations may cause malfunctions. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording. If water droplets or other liquids splash on the LCD screen and make it wet, immediately wipe off the screen with a soft cloth. Leaving liquids on the LCD screen surface can harm the quality and cause a malfunction. The screen may be discolored and that may cause a malfunction. X Battery life and number of images you can record/ view The number of images that can be recorded is an approximate number when shooting with a fully charged battery pack. The number may be less depending on the circumstances. The number of images that can be recorded is when shooting under the following conditions: ­ Using Sony "Memory Stick PRO Duo" (Mark2) media (sold separately). ­ When a fully charged battery pack (supplied) is used at an ambient temperature of 25°C (77°F). The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. ­ The flash strobes once every two times. ­ The power turns on and off once every ten times. The battery life for movies is when shooting under the following conditions: ­ Recording mode: 720 FINE ­ When continuous shooting ends because of set limits (page 28), press the shutter button down again and continue shooting. Shooting functions such as the zoom do not operate. You can use the camera and the battery charger (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50 Hz/ 60 Hz. An electronic voltage transformer is unnecessary and its use may cause a malfunction. [. . . ] Cleaning the lens Wipe the lens with a soft cloth to remove fingerprints, dust, etc. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: ­ Do not expose the camera to chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide. ­ Do not touch the camera with any of the above on your hand. [. . . ]