User manual SONY RCD-W2000ES

[. . . ] 4-246-924-11(1) Compact Disc Recorder Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. RCD-W2000ES ©2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. WARNING For the customers in the U. S. A. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] ­ The digital data is converted to analog data, then recorded. You cannot make direct digital recordings. ­ You cannot adjust the recording level. · The minimum length of CD-DA is 4 seconds. Therefore, the number of tracks made by the Synchro-Recording may differ from the original disc. · When recording from DECK A to DECK B, the play and record times shown in the display may be different. · The maximum number of tracks is 99 due to the system limitations of CD format. Recording/Editing · Audio CD-Rs are recordable only one time. Audio CD-RWs are recordable for multiple times. See page 7 for details. About finalization · Finalization is a final editing process that allows recorded CD-Rs and CD-RWs to be played in other players. · Once a CD-R has been finalized, the recorded material cannot be changed. The recorded material on a CD-RW can be altered even after finalizing it. · Unfinalized discs can only be played back on DECK B of this unit. See page 7 for details. Automatic conversion of digital sampling rates A built-in sampling rate converter automatically converts the sampling frequency of various digital sources to the 44. 1 kHz sampling rate. This allows you to monitor and record sources such as 32 kHz or 48 kHz DAT tape or satellite broadcasts. About the Serial Copy Management System · The Serial Copy Management System allows you to make only a single copy of a digitally recorded source. This unit conforms to the Serial Copy Management System. · You cannot perform a digital recording from a digitally recorded CD-R or CD-RW. In this case, make analog recording. continued 21 Types of Recording The following types of recordings are possible, depending on the audio source. For details on each operation, see the reference pages. Automatic Additional CD-TEXT Finalization Recording Copy Recording Level When recording from DECK A Make-Disc SynchroRecording*1 (Make Disc On) Record all tracks on the selected disc in the original order. High-Speed SynchroRecording*2 (page 24) Record in high-speed. You cannot hear the sound while recording. Normal speed SynchroRecording (page 25) Record in normal speed while monitoring the sound. High-Speed SynchroRecording*2 a ×3 a Same as original Synchro-Recording (Make Disc Off) Record from one disc or several discs in the order Normal speed Synchroyou want. [. . . ] ­ a disc recorded with complicated tree structure. ­ a disc to which data can be added (nonfinalized disc). continued 39 DECK B (the CD-R and CD-RW recording section) The unit does not operate or operates poorly. Other No sound is output. · The CD-R or CD-RW may be damaged. Replace the disc. The player does not start playing. · Place the CD-R or CD-RW with the label side up. · Moisture has formed inside the unit. [. . . ]