User manual SONY RCD-W3

[. . . ] To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] The unit starts playing tracks in the programmed order. After displaying the first track number in step 3, turn AMS counterclockwise (or press . On the remote) to select "AL" instead of a track number. Press PLAY MODE repeatedly until "PGM" goes off. ) Each time you press the button, the last programmed track is erased. 1 While the unit is stopped, press PLAY MODE repeatedly until "PGM" lights up in the display. You can also select the track number using the number buttons on the remote in step 3 above. When you press H, you can play the same program again. ⷠTo check the total number of the programmed tracks, press TIME while the unit is stopped. Remote) to select the desired track number, then press AMS (or PLAY MODE). To program MP3 files, press ALBUM until ALBUM SELECT indicator in the display lights up, then turn AMS (or press ALBUM +/­ on the remote) to select the desired album title. The Serial Copy Management System allows you to make only a single copy of a digitally recorded source. You cannot perform a digital recording from a digitally recorded CD-R or CD-RW. The following types of recordings are possible, depending on the audio source. You cannot hear the sound while recording. Normal speed SynchroRecording (page 24) Record in normal speed while monitoring the sound. High-Speed SynchroRecording*2 (Make Disc Off) Record from one disc (or several discs for RCDNormal speed SynchroW500C) in the order you Recording want. You can also record in programmed order. Adjustable with menu operation Adjustable with menu operation Adjustable with REC LEVEL When recording from the component connected to the DIGITAL OPTICAL IN jack Manual Recording (page 25) When recording from the component connected to the ANALOG IN jack Manual Recording (page 25) *2 Even if you select High-Speed Synchro-Recording, the recording speed automatically changes to normal speed in the following cases. *3 Be sure to use a blank disc (that has not been recorded). To play the recorded CD on DECK A or another CD player, perform finalization (page 29). ⷠTo record your favorite tracks from the CDs in DECK A, make a program (page 19). [. . . ] This is because, DECK B is a CD-R/RW writer and reads various version information while setting optimum recording condition. If you experience any of the following difficulties while using the unit, use this troubleshooting guide to help you remedy the problem. Limitations when recording over an existing track ⷠThe correct remaining recording time may not be displayed. When you turn on the unit, you will hear some mechanical noise from the unit. [. . . ]