User manual SONY RC-DW50C

[. . . ] 4-242-051-13(1) Compact Disc Recorder Operating Instructions Owner's Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. RCD-W50C/W10 ©2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. [. . . ] For details, see "Using the Setup Menu" on page 28. · You cannot change the setting while recording. · When you record through the DIGITAL OPTICAL IN jack, or when you make Synchro-Recording, the SBM function is automatically canceled. 17 Synchro-Recording a CD to CD-R or CD-RW You can easily make digital recordings from a CD to a CD-R or CD-RW. Before recording, see "Notes on Recording" on page 16. To record a CD at high speed, see page 19. Each recording type can be selected both in normal speed Synchro-Recording and High-Speed SynchroRecording (page 19). Normal Synchro-Recording (NORM SYNC) Notes · After recording, you must finalize the disc. Until the disc is properly finalized, it cannot be played on any other machine. See "Finalizing a CD-R or CD-RW" on page 24. · A CD text contained in the disc is not automatically recorded on the disc. To label tracks/discs, see "Labeling Tracks/Discs" (page 26). Tip · You cannot pause recording in Synchro-Recording. · If Repeat Play has been set, it is automatically canceled. · If you start the recording when Shuffle play is set, Shuffle play is automatically canceled. · Silent Pause and SBM functions do not work during Synchro-Recording. · The recording level is set to 0. 0 dB regardless of the Setup Menu setting. · When copying a disc digitally recorded under control of the Serial Copy Management System (SCMS), the unit automatically select the analog recording. High speed recording changes to normal speed recording. For detailed explanation on SCMS, refer to the "Notes" on page 20. · When copying a commercial music CD contains copy protection code, the unit automatically select the analog recording. High speed recording changes to normal speed recording. · You cannot stop recording during finalizing in Make-Disc Synchro-Recording. Normal speed SynchroRecording The disc is recorded at the same speed as the playing CD. You can hear the sound during recording. When using the remote, set SELECT to CDR. DISC 1-5 A POWER (OPEN/CLOSE for RCD-W10) OPEN/CLOSE You can perform Synchro-Recording in the programmed order (page 15). Make-Disc Synchro-Recording (MAKE DISC) Records a CD in the original order of its track number regardless of the selected play mode, and finalizes the disc. Be sure to use the disc that has not been recorded. [. . . ] · Operate the amplifier properly. · When using the headphones, turn PHONE LEVEL to turn up the output level. The remote does not operate the unit. Additional Information · · · · · Insert a disc. Moisture condensation has formed inside the unit. Take the disc out and leave the unit turned on for about an hour until the moisture evaporates (page 4). [. . . ]