User manual SONY RC-P750

[. . . ] REMOTE CONTROL PANEL RCP-750/751 OPERATION MANUAL 1st Edition (Revised 1) [Japanese/English] , 1 2 , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2(J) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3(J) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4(J) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 7 SENS (sensitivity) control knob Used for manual iris adjustment in Absolute mode. This control is not operative when Relative mode is selected. See the table "Iris adjustment functions" on the next page. 8 COARSE control knob Used for manual iris adjustment. See the table "Iris adjustment functions" on the next page. 8(E) 9 Master black control ring Turn to manually adjust the master black level. 0 IRIS control lever When the AUTO button is not lit, you can adjust the iris manually by moving the lever. When the AUTO button is lit, the reference value for automatic iris adjustment can be set in a range of ±1f with this lever. See the table "Iris adjustment functions" to the right. IRIS lever (RCP-750)/ IRIS control (RCP-751) COARSE control Iris adjustment functions Relative mode Absolute mode (RELATIVE button lit) (RELATIVE button not lit) Adjusts the iris with relative values within 1/4 of the total range from OPEN to CLOSED. Adjusts the iris within the variable range set by the SENS and COARSE controls. Adjusts the total Sets the lower limit range from OPEN for CLOSED. Sets the upper limit for OPEN according to CLOSED value set by the COARSE control. qa IRIS RELATIVE (iris relative) button When the IRIS/MB ACTIVE button is lit, the iris adjustment mode can be selected with this button. Press and light up the button for Relative mode or press so that it goes dark for Absolute mode. When the IRIS/MB ACTIVE button is not lit, Relative mode is automatically selected and this button is not operative. SENS control Iris/master black control block (RCP-751) 4 IRIS RELATIVE button 1 MASTER BLACK display EXT 5 f-number display 6 EXT indicator 7 SENS control knob MASTER BLACK 2 MASTER BLACK control 8 COARSE control knob RELATIVE SENS CLOSE OPEN COARSE 3 IRIS/MB ACTIVE button IRIS/MB ACTIVE AUTO 9 IRIS control 0 Iris gauge IRIS qa AUTO button 1 MASTER BLACK display Displays the current master black setting in the range from ­99 to +99. 2 MASTER BLACK control Manually adjust the master black level. The setting is displayed in the MASTER BLACK display. 3 IRIS/MB ACTIVE (iris/master black active) button Press and light up this button to enable the iris/master black control block of the panel. When the PANEL ACTIVE button is pressed, this button also lights. If you press this button so that it goes dark, the panel will be locked, preventing accidental misoperation. 9(E) Locations and Functions of Parts 4 IRIS RELATIVE (iris relative) button When the IRIS/MB ACTIVE button is lit, the iris adjustment mode can be selected with this button. Press and light up the button for Relative mode or press so that it goes dark for Absolute mode. When the IRIS/MB ACTIVE button is not lit, Relative mode is automatically selected and this button is not operative. 5 f-number display Displays the f number of the current iris setting. When the iris is closed, "CL" is displayed. 6 EXT (lens extender) indicator Lights when the lens extender is used. qa AUTO button Press and light the button to automatically adjust the iris according to the amount of input light. When this button is lit, the reference value for automatic iris adjustment can be set in a range of ±1f with the iris control. If you press the button when lit, it goes dark and manual iris adjustment is enabled. Connector Panel 1 CCU/CNU REMOTE connector 7 SENS (sensitivity) control knob Used for manual iris adjustment in Absolute mode. This control is not operative when Relative mode is selected. See the table "Iris adjustment functions" on the previous page. 2 AUX REMOTE connector 3 EXT I/O connector REMOTE CCU/CNU AUX EXT I/O 8 COARSE control knob Used for manual iris adjustment. See the table "Iris adjustment functions" on the previous page. 9 IRIS control When the AUTO button is not lit, you can adjust the iris manually by turning the control. When the AUTO button is lit, the reference value for automatic iris adjustment can be set in a range of ±1f with this control. See the table "Iris adjustment functions" on the previous page. 1 CCU/CNU REMOTE (camera control unit/ camera command network unit remote) connector (8-pin) Connect to the RCP/CNU connector of a camera control unit or the RCP connector of a camera command network unit. 2 AUX REMOTE (auxiliary remote) connector (8-pin) Connect to the RCP-700/701. [. . . ] However, because your camera does not support the MagicGate standards, data recorded with your camera is not subject to MagicGate copyright protection. ITE WH EXT Ea AR /FL CK BLA On MagicGate /MB E IRISCTIV A MagicGate is copyright-protection technology that uses encryption technology. Note Structure of Memory Stick Never insert/remove a Memory Stick while the access lamp is lit in red. Terminal To remove a Memory Stick If you push the inserted Memory Stick, the Memory Stick will pop out a little. Then pull the Memory Stick out. Write-Protect tab Access lamp The access lamp shows the status of the Memory Stick. Lit in green: There is a Memory Stick in the slot. In this condition, you can safely eject the Memory Stick. [. . . ]