User manual SONY RDP-X200IP

[. . . ] 4-400-214-32(1) Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. [. . . ]  Connection with all Bluetooth devices cannot be guaranteed. — A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, Inc. — Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.  Depending on the device to be connected, it may require some time to start communication. Compatible iPod/iPhone/iPad models The compatible iPod/iPhone/iPad models are as follows. Update the software of the iPod/iPhone/iPad to the latest version before using it with this unit. Audio-in There is no sound.  Make sure the audio connecting cable is connected firmly.  Make sure that the connected optional component is in playback mode.  Make sure that the Audio-in function is activated.  Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, a blanket, etc. ) or near materials (a curtain) which might block the ventilation holes.  Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.  During a thunderstorm, do not touch the antenna (aerial) and plug.  Do not touch the unit with wet hands.  Do not place the unit anywhere near water. Wireless music streaming compatible models Preparations Power source Auto power off After playback of music (from an iPod on the Dock, Bluetooth connection, or optional component connected to the AUDIO IN jack) has finished, and if no operation is performed for about 20 minutes, the unit will automatically turn off. *  The iPod nano (6th generation) cannot be controlled by the remote when the command of “MENU, ” “, ” “, ” and “ENTER” is pressed. Design and specifications are subject to change without notice. To use the AC adaptor 1 Connect the supplied AC power cord to the AC 2 Connect the AC adaptor to the DC IN 20V jack adaptor. on the back of this unit firmly and plug it into a wall outlet. Hereby, Sony Corp. , declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www. compliance. sony. de/ Use of the RLAN network is governed: — with respect to private use, by the Legislative Decree of 1. 8. 2003, no. 259 (“Code of Electronic Communications”). In particular Article 104 indicates when the prior obtainment of a general authorization is required and Art. 105 indicates when free use is permitted; NOTES ON LITHIUM BATTERY  Wipe the battery with a dry cloth to assure a good contact.  Be sure to observe the correct polarity when installing the battery.  Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. iPod indicator * During playback, this operation returns you to the beginning of the current track. To go back to the previous track, press twice. Example: iPhone 4S Power indicator Bluetooth indicator Audio-in indicator Notes  If a pop-up message appears on the display of the iPod touch, iPhone or iPad, see “About App. ”  Some operations may differ or may not be available on some models of iPod. [. . . ]  Operate the iPod to terminate the connection. For details, refer to the user’s guide of the iPod. Operating an iPod on the Dock 1 Set the iPod on the Dock Connector. The Dock Connector can be tilted slightly. For details, see “How to handle an iPod. ” 4 Perform the pairing procedure on the iPod to The Bluetooth indicator lights up. Example: iPhone 4S To remove an iPod 2 Press . [. . . ]