User manual SONY RDP-X30IP

[. . . ] In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. [. . . ] Make sure to use the correct type of cable.  If the volume level is low, adjust the volume of the unit first. If the volume is still too low, adjust the volume of the connected component.  When playing an optional component connected to the AUDIO IN jack, stop playback of an iPod.  Disconnect the audio connecting cable from the unit when it is not in use.  Make sure the AC adaptor is connected to the wall outlet firmly.  Adjust VOLUME +/− (VOL +/− on the remote).  Make sure that the unit is not in the vicinity of in-use portable phones, etc.  If you use an audio connecting cable, disconnect the cable when it is not in use. The dock connector can be tilted slightly. Two different music sources are mixed together during playback.  Stop playback of either the iPod or the optional component. Operations Power source Auto power off After playback of an iPod (or component connected to the AUDIO IN jack) has finished, if no operation is performed for about 30 minutes, the unit will automatically turn off.  (Backward)  Go back to the previous track. During playback, this operation returns to the beginning of the current track. To go back to the previous track, press twice.  Press and hold while listening to the sound to locate a desired point.  (Up)/ (Down)  Select a menu item or track for playback. ENTER  Execute the selected menu item or begin playback. SOUND  Press once or twice to obtain the desired sound effect. (For details, see “To enjoy the bass or expansion sound effect. ”) VOL +/– (Volume plus/minus)  Adjust the volume. Note  Some operations may differ or may not be available between different models of iPod. iPod There is no sound.  Make sure the iPod is connected firmly. An operation is not performed. The iPod does not charge.  Make sure the iPod is connected firmly.  Make sure the iPod is connected firmly.  Make sure the AC adaptor is connected firmly. 2 Press  (direct power-on). To prepare a power source Connect the supplied AC adaptor to the DC IN 18. 2V jack on the back of this unit firmly, and plug it into a wall outlet. The iPod begins playback. You can operate the connected iPod via this unit or the iPod itself. Audio-in There is no sound. The sound is low.  Make sure the audio connecting cable is connected firmly.  Check the volume of the connected optional component. To place and remove the iPod About App A dedicated dock App for iPod touch and iPhone available at Apple App Store. Search for “D-Sappli” and download the free App to find out more about the functions. [. . . ] You can switch between effects by pressing the SOUND button. Amber (MEGA BASS): High quality bass sound will be heard. This setting is enabled by default when you first turn on the unit. Green (MEGA BASS and MEGA Xpand): Additional expansion of the sound field will be heard. [. . . ]