User manual SONY RDP-XF100IP

[. . . ] 4-182-698-12(1) Owner's Record The model number and the serial number are located on the bottom. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. _______________________________ For customers in the USA Please register this product on line at http://www. sony. com/productregistration Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. [. . . ] Do not recharge, disassemble or dispose of in fire. · Dispose of used battery promptly. Keep away from children. Read these instructions. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 2 Note · It will take approximately 7 hours to charge the battery. Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Using the rechargeable battery You can operate the unit with the rechargeable battery instead of the AC power adaptor. Note · The maximum output will be lower when the AC power adaptor is disconnected. 3 4 To check the remaining power of the battery The remaining power of the battery will be indicated when the unit is turned on. As the remaining battery power depletes, the battery indicator decreases. 5 Level 1 Level 2 Level 3 Level 4 Operations To set the iPod 1 Press PUSH OPEN on the Docking Tray at the front of this unit to open. The tray clicks to lock at the open position. To Turn off the iPod Pause playback Press Press and hold . · Do not carry the unit with an iPod set on the connector. · When placing or removing the iPod, hold the Docking Tray securely. · Before disconnecting the iPod, pause playback. The rechargeable battery is depleted. There is no audio. · Connect to the AC power adaptor to charge the battery. · Adjust the VOL +/-. General Speaker Approx. [. . . ] · The unit cannot be turned on with the remote commander when the AC power adaptor is disconnected. Playing an iPod Notes Notes 1 Press (power). 2 Press FUNCTION repeatedly until "iPod" appears in the display. Frequency digits appear in the display after a short period. Connecting optional components You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. iPod nano 3rd generation (video) iPod classic iPhone 3 Press and hold TUNING +/- until the frequency Power off hold function You can set the power off hold function in order to avoid unintentional powering on while carrying the unit. To set the power off hold function Press and hold (power) when the AC power adaptor is disconnected. [. . . ]