User manual SONY RDR-GXD500

[. . . ] Should you experience a problem with this recorder, please refer to the trouble shooting section on page 91. To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains lead must only be changed at a qualified service shop. Check that the unit's operating voltage is identical with your local power supply. [. . . ] Then, follow the instructions in the menu (press H when "Press SELECT" appears). The PBC function of Super VCDs does not work with this recorder. Super VCDs are played in continuous play mode only. With the playback side facing down To resume playback from the point where you stopped the disc (Resume Play) When you press H again after you stop the disc, the recorder resumes playback from the point where you pressed x. To start from the beginning, press TOOLS, select "Play Beginning" and press ENTER. Playback starts from the beginning of the title/track/scene. The point where you stopped playing is cleared when: ­ you open the disc tray. ⭠you switch the Title List menu to Original or Playlist (DVD-RW in VR mode only). ­ you edit the title after stopping playback. ⭠you change the settings on the recorder. ­ you turn off the recorder (VIDEO CD/CD/ DATA CD only). If you use the SMARTLINK connection, you can easily display the Title List. When the TV is turned on or in standby mode, insert a disc and press TITLE LIST. You can also use the H button in step 4 (page 58) to start playback. ⷠEven if a timer recording starts during playback, neither the recording nor playback will stop (page 64). If you play a restricted DVD, the message "Do you want temporarily change parental control to *?Enter your four-digit password using the number buttons. You can lock the disc tray to prevent children from ejecting the disc. When the recorder is in standby mode, press O RETURN, ENTER, and then {/1 on the remote. "LOCKED" appears in the front panel display. The Z (open/close) button does not work while the Child Lock is set. To unlock the disc tray, press O RETURN, ENTER, and then {/1 on the remote again when the recorder is in standby mode. [. . . ] Z Hint You can turn off the front panel display when the recorder is turned off by setting "Dimmer" to "Power Save" in Options Setup (page 89). Sections of a picture or a music feature that are smaller than titles. DVDs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. These signals are included in some software or TV programmes and restrict recording on this recorder. [. . . ]