User manual SONY RDR-HX722

[. . . ] Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. Notice for customers in the United Kingdom and Republic of Ireland A molded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i. e. , marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. [. . . ] "Undo": Undoes the last edit you made. 4 5 6 7 Select a title, and press ENTER. A check mark appears in the check box. To clear the check mark, press ENTER again. Repeat step 4 to select all of the titles you want to edit. When you finish selecting titles, press , . The sub-menu appears. Select an option, and press ENTER. "Erase": Erases the selected titles. "Protect": Protects the titles. " " appears next to the protected title. "Unprotected": Unprotects the titles. "Change Genre": Changes the genre of the titles. Erasing and Editing z Hint You can label or re-label DVDs (page 38). z Hint You can exit "Multi-Mode" by pressing , and selecting "Single-Mode" while selecting titles. Editing multiple titles (MultiMode) HDD Erasing a section of a title (A-B Erase) HDD -RWVR -RVR You can select and edit up to 24 titles at one time. You can select a section (scene) in a title and erase it. Note that erasing scenes in a title cannot be undone. 1 2 3 Press TITLE LIST. Press , . The sub-menu appears. 1 2 After step 2 of "Erasing and Editing a Title, " select "Edit, " and press ENTER. Select "A-B Erase, " and press ENTER. For the HDD, select a type of editing, and press ENTER. The display for setting point A appears. · To move more titles, repeat from step 2. 5 Combining multiple Playlist titles (Combine) 1 2 3 4 Press TITLE LIST. Switch to the Playlist (page 72). Select a Playlist title, and press , . The sub-menu appears. 6 7 8 Select a chapter using </, , and press ENTER. Select "Move, " and press ENTER. Select a new location for the chapter using </, , and press ENTER. The chapter moves to the new location. Select "Edit, " and press ENTER. Select "Combine, " and press ENTER. 5 6 Select a title you want to combine. Select "Yes, " and press ENTER. The titles are combined. 77 Dubbing (HDD y DVD) Before Dubbing HDD -RVR +RW -RVideo -RWVR -RWVideo +R In this section, "dubbing" refers to "copying a recorded title on the internal hard disk drive (HDD) to another disc, or vice versa. " You can dub a playing title using the HDD/DVD DUB button (see "HDD/DVD Dubbing" on page 79) or you can select to dub multiple titles all at once (see "Dubbing Using Dubbing List" on page 80). You can also dub an entire DVD disc to make a backup copy (see "Making a Backup Disc (DVD Backup)" on page 83). Before you start, read the following precautions, which are common to all dubbing methods. If you want to record from a digital video camera connected to the DV IN jack, see "DV Camcorder Dubbing" on page 84. To record from equipment connected to the LINE IN jacks, see "Recording from Connected Equipment" on page 59. · The chapter marks in the dubbing source are dubbed. The position of chapter marks may be slightly changed from the original. However, the chapter marks in the dubbing source are not retained in the dubbed title when dubbing to a DVD-RW/DVD-R (Video mode), DVD+RW, or DVD+R at normal speed. [. . . ] The following image sizes can be displayed: width 160­5, 120 pixels by height 120­3, 840 pixels. · This recorder supports MP3 audio tracks recorded with a sampling frequency of 32 kHz, 44. 1 kHz, and 48 kHz. · No more than a 1 GB MP3 audio track can be played. 138 About i. LINK The DV IN jack on this recorder is i. LINKcompliant for digital video cameras. This section describes the i. LINK standard and its features. i. LINK baud rate i. LINK's maximum baud rate varies according to the equipment. [. . . ]