User manual SONY RDR-HX925

[. . . ] Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. Notice for customers in the United Kingdom and Republic of Ireland A molded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i. e. , marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. [. . . ] Select "Motion" for a picture, including subjects that move dynamically. Select "Still" for a picture with little movement. "Cinema": Converts the progressive video signal to match the type of DVD software that you are watching when "Component Video Out" is set to "Progressive" (page 136). Select "Auto1" to automatically detect the software type (Film-based or Videobased) and select the appropriate conversion mode. If the picture appears unnatural, select "Auto2, " "On, " or "Off. " "YNR" (luminance noise reduction): Reduces noise contained in the luminance element of the video signal. "BNR" (block noise reduction): Reduces "block noise" or mosaic-like patterns in the picture. "MNR" (mosquito noise reduction): Reduces the faint noise appearing around the outlines of the images. The noise reduction effects are automatically adjusted within each setting range according to the video bit rate and other factors. "Sharpness": Sharpens the outlines of the images. "Detail": Adjusts the sharpness of images outlines. "White Enhancer": Adjusts the intensity of white. "Black Enhancer": Adjusts the intensity of black. For details, refer to the operating instructions supplied with your TV. · The "TV Pause" function will not work correctly when watching TV via the connected component such as a VCR or digital tuner. The "TV Pause" function works only with the channel selected on the TV. · You cannot use the "TV Pause" function as a recording feature from the component (VCR, etc. ) connected to the LINE 1/DECODER jack. · The "TV Pause" function will not work if the connected TV does not comply with SMARTLINK. To check whether your TV complies with SMARTLINK, refer to the operating instructions supplied with your TV. Playback m TV PAUSE x REC STOP M H/X/x 87 Playing from the Beginning of the Programme You Are Recording (Chase Play) HDD Playing a Previous Recording While Making Another (Simultaneous Rec and Play) HDD -RVR +RW -RVideo -RWVR -RWVideo +R "Chase Play" allows you to view the recorded part of a programme on the HDD while the recording is being made. You do not need to wait until the recording finishes. DVD VCD DATA DVD DATA CD "Simultaneous Rec and Play" allows you to view a previously recorded programme while recording programmes. Playback continues even if a timer recording starts. Use this function as follows: · While recording to the HDD: Play another title on the HDD. Play a previously recorded programme on a DVD by pressing the DVD button. · While recording to a DVD: Play a previously recorded programme on the HDD by pressing the HDD button. [. . . ] The following image sizes can be displayed: width 160­5, 120 pixels by height 120­3, 840 pixels. · This recorder supports MP3 audio tracks recorded with a sampling frequency of 32 kHz, 44. 1 kHz, and 48 kHz. · No more than a 1 GB MP3 audio track can be played. 162 About i. LINK The DV IN jack on this recorder is i. LINKcompliant for digital video cameras. This section describes the i. LINK standard and its features. i. LINK baud rate i. LINK's maximum baud rate varies according to the equipment. [. . . ]