User manual SONY RDR-HXD1070

[. . . ] To find out useful hints, tips and information about Sony products and services please visit: www. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The mains lead must be changed only at a qualified service shop. Do not expose the battery to excessive heat such as direct sunlight, fire or the like. [. . . ] You can select "Programme" from "Play Mode" in the System Menu. You can play the contents of the HDD or a disc in the order you want by arranging the order of the titles/chapters/albums/tracks on the HDD or disc to create your own programme. You can make a programme of up to 24 steps. You can adjust the picture quality from connected equipment, such as a TV or projector by selecting a preset setting. You can also adjust the picture quality by changing detailed settings, and store up to three settings in the memory. Select a chapter or track (example: Chapter 01) using M/m, and press ENTER. If you make a mistake, select the step number (example: 01. Dynamic: produces a bold dynamic picture by increasing the picture contrast and the colour intensity. To programme other chapters or tracks, press </M/m/, to select a step number, and repeat steps 4 and 5. To create your own settings, see "To create your own setting" below. Select an item using M/m, and adjust settings using </, . Select "Motion" for a picture, including subjects that move dynamically. select "Still" for a picture with little movement. "Cinema": Converts the progressive video signal to match the type of DVD software that you are watching when "Component Video Out" is set to "Progressive" (page 136). " "YNR" (luminance noise reduction): Reduces noise contained in the luminance element of the video signal. "MNR" (mosquito noise reduction): Reduces the faint noise appearing around the outlines of the images. The noise reduction effects are automatically adjusted within each setting range according to the video bit rate and other factors. Select this when the picture appears too dark. The setting is automatically stored as the setting you selected in step 1. If the outlines of the images on your screen become blurred, set "BNR" and/or "MNR" to "Off. " · Depending on the disc or the scene being played, the above BNR or MNR effects may be hard to discern. Also, these functions may not work with some screen sizes. [. . . ] The image size that can be displayed is limited. The following image sizes can be displayed: width 160­5, 120 pixels by height 120­3, 840 pixels. This recorder supports MP3 audio tracks recorded with a sampling frequency of 32 kHz, 44. No more than a 1 GB MP3 audio track can be played. [. . . ]