User manual SONY RDR-VX500 QUICK START

[. . . ] If your TV accepts progressive 480p format signals, you must use this connection and then set "Progressive" of "Video" to "On" in the Setup menu. For further explanations, see "Video Settings (Video)" in the Operating instructions. Connecting an AV amplifier (receiver) You have a: Cable (cable box without video / audio output) ­or­ Antenna 1 Disconnect your VCR If you have been using a VCR, you do not need to disconnect all of your equipment. [. . . ] You can change them later using Setup. " does not appear on your TV screen, select "Easy Setup" from "Setup" in the System Menu. ENTER Enter Return SYSTEM MENU Exit Press M/ 7 you havemato select whether or not cable connection, and press ENTER. If you have cable, select "Cable. " If not, select "Antenna. " Easy Setup Select the way in which you will receive channels. Antenna Cable Insert a DVD Disc Press DVD 1 recorder. to control the DVD SYSTEM MENU Insert a VHS Tape Press 1 VCR. VIDEO to control the Insert a 2 in place. tape with its safety tab CH/ TRACKING Playback the Recorded DVD Disc Press DVD 1 recorder. to control the DVD 1 4 7 2 5 8 0 3 6 9 4 Press M/m to 5 the on-screenselect a language for display, then press Press ENTER. ENTER. Move Move ENTER Enter Return Exit Easy Setup Press OPEN/CLOSE 2 place aZrecordable DVDand the on English Français Español 2 Press TITLE LIST. Title List(Original) No. Title The TITLE LIST menu appears. INPUT SELECT 10:10 AM Length Edit Select the screen language. The Tuner function 8 searching Presetreceivablestarts for all channels. This may take a couple of minutes. disc tray. Easy Setup Searching for receivable Channels. 25 Please wait. 01 CH 23 01:29:03 > 00:31:23 > 01:59:00 > 00:58:56 > Press Z OPEN/CLOSE 3 to close the disc tray. again "LOAD" will appear for about a minute in the VCR-DVD recorder's front panel display. See "Quick Guide to DVD Disc Types" in the Operating Instructions for more details about the differences between disc types. hint Don't know what's going on? Look at your TV screen, not the front panel display. Messages explaining the current status of the DVD recorder will appear on your TV screen. Note that the remote does not work while "LOAD" is flashing, so be patient! DISPLAY 02 CH 66 03 CH 95 04 CH 97 TITLE LIST ZOOM T CH 23 Nov/16/2004 08:00 PM Move ENTER Enter ENTER Enter Return SYSTEM MENU Exit Return SYSTEM MENU Exit Return SYSTEM MENU Exit ENTER Press M/m to select the title you 3 want to play and press ENTER. The sub-menu appears. Title List(Original) No. [. . . ] Then select a channel on your cable box or satellite receiver. · If you connected your cable box to the VCR-DVD recorder's antenna input jack, select channel 2, 3 or 4, whichever channel is used to receive the signal from the cable box. [. . . ]