User manual SONY RHT-G1000

[. . . ] This system has the following instructions: · To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] ⷠFor the numeric codes, only the first three numbers entered are valid. To clear the memory of the remote To clear all programmes, do the following to reset the remote to factory settings. See the tables on pages 9­11 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker's code respectively). The indicator flashes 3 times, then goes off. Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be assigned to a component. If you fail to program your remote using one of the codes, try using other codes. The numeric codes are based on the latest information available for each brand. There is a chance, however, that your component will not respond to some or all of the codes. ⷠAll of the input buttons on this remote may not be available when used with your particular component. You can control connected components with the remote of this system. Use the tactile dot as a reference when operating the system and other audio/video components. Turns off this system and other Sony audio/video components. Changes the sound to Multiplex, Bilingual or Multi channel TV Sound. Changes the sound to Multiplex or Bilingual Sound. Clears a mistake when you press incorrect numeric buttons or returns to continuous playback. Changes the sound to Multiplex or Bilingual Sound. The above explanations are intended to serve as an example only. Depending on the component, the above operations may not be possible, or may operate differently than described. ⷠBefore you press C/X/x/c to operate this system, press AMP MENU first; to operate other components, press input buttons and AV MENU or TOP MENU/ GUIDE first. You can adjust the level of the subwoofer. This setting is applied to all sound fields. [. . . ] To prevent a gas explosion, do not connect the ground wire to a gas pipe. You have set progressive format on your DVD player but your TV cannot accept the signal in progressive format. In this case, return the setting to interlace format on your DVD player. Even if your TV is compatible with progressive format (525p/625p) signals, the image may be affected when you set progressive format on your DVD player. [. . . ]