User manual SONY RHT-G1550

[. . . ] 4-129-923-11(1) Theatre Stand System Operating Instructions RHT-G1550 ©2009 Sony Corporation 3 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] "MONO" lights up for a monaural program. 3 4 Press MENU. Press X/x repeatedly until "Memory?" appears in the front panel display. 23GB Listening to the radio Preset radio stations in the stand's memory first (see "Presetting radio stations" (page 23)). INPUT SELECTOR For automatic tuning, press and hold TUNING + or ­. The automatic tuning stops when the stand tunes in a station. To stop the automatic tuning manually, press TUNING + or ­. If an FM program is noisy If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. ?/1 INPUT SELECTOR +/­ DISPLAY C, X, x, c, CENTER SUBWOOFER DISPLAY LEVEL AMP MENU 1 2 MENU Press MENU. Press X/x repeatedly until "FM Mode?" appears in the front panel display, then press or c. Press X/x to select "MONO. " · STEREO: Stereo reception. · MONO: Monaural reception. RETURN MENU PRESET- NIGHT DIMMER PRESET+ 3 PRESET +/­ TUNING +/­ TUNING- TUNING+ MUTING VOLUME SOUND FIELD 4 5 Press . The setting is made. VOLUME +/­ Press MENU. Tip · To improve reception, reorient the FM wire antenna (aerial) (supplied). 1 2 Press INPUT SELECTOR + or ­ repeatedly until "FM" or "AM" appears in the front panel display. The last received station is tuned in. Press PRESET + or ­ repeatedly to select the preset station. Each time you press the button, the stand tunes in one preset station. 3 Adjust the volume by pressing VOLUME +/­. To turn off the radio Press "/1 to turn off the stand. To change to another function, press INPUT SELECTOR + or ­. To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press TUNING + or ­ repeatedly. 24GB Naming preset stations You can enter a name for preset stations. These names (for example, "XYZ") appear in the front panel display when a station is selected. Note that no more than one name can be entered for each preset station. Viewing the station name or frequency in the front panel display When the stand is set to "FM" or "AM, " you can check the frequency using the front panel display. Press DISPLAY. Tuner Functions 1 2 3 4 Press INPUT SELECTOR + or ­ repeatedly until "FM" or "AM" appears in the front panel display. The last received station is tuned in. Press PRESET + or ­ repeatedly to select the preset station you want to create an index name for. Press X/x repeatedly until "Name In?" appears in the front panel display. Each time you press DISPLAY, the station name and the frequency alternate in the front panel display. Tips · The station name is displayed if you have entered a name for a preset station. · The frequency in the front panel display switches to the station name after several seconds. 5 6 Press . Create a name by using C/X/x/c. Press X/x to select a character, then press c to move the cursor to the next position. Letters, numbers, and other symbols can be input for a radio station name. If you enter a wrong character Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character. 7 Press . "Complete!" appears in the front panel display, and the station name is stored. 8 Tip Press MENU. · You can check the frequency in the front panel display by pressing DISPLAY repeatedly (page 25). 25GB Using the Radio Data System (RDS) What is the Radio Data System? The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display. RDS is available only for FM stations. * Note · RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly, or if the signal strength is weak. * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the frequency in the front panel display switches to the station name*. * If an RDS broadcast is not received, a station name will not appear in the front panel display. Tip · When a station name is displayed, you can check the frequency by pressing DISPLAY repeatedly. 26GB Surround Function Enjoying the surround effect Selecting the sound field This stand can create multi channel surround sound. You can select one of stand's optimized preprogrammed sound fields. Surround Function INPUT SELECTOR CENTER SUBWOOFER DISPLAY LEVEL AMP MENU RETURN MENU PRESET- NIGHT DIMMER PRESET+ TUNING- TUNING+ MUTING VOLUME SOUND FIELD SOUND FIELD +/­ Press SOUND FIELD +/­. The present sound field appears in the front panel display. Each time you press the SOUND FIELD +/­ button, the display changes cyclically as follows: STANDARD y MOVIE y DRAMA y NEWS y SPORTS y GAME y MUSIC y JAZZ y CLASSIC y ROCK y POP y LIVE y FLAT y STANDARD . . . . . continued 27GB Available sound fields Suitable source Sound field Effect All Video source STANDARD MOVIE * DRAMA * NEWS * SPORTS * GAME * MUSIC* Suits various sources. Recreates powerful and realistic sound, along with clear dialog. Produces the announcer's voice clearly. [. . . ] · Replace both batteries in the remote with new ones, if they are weak. · Make sure you select the correct input on the remote. The volume turns down when the output method changes from the TV speaker to the stand speaker. · Change the setting of the TV to turn connected components off automatically when you turn off the TV. For details, refer to the operating instructions of the TV. · The Volume Limit function is working. For details, refer to "Using the Volume Limit function" (page 33). continued 41GB If the stand still does not operate properly after performing the above measures, reset the stand as follows: Use buttons on the stand for the operation. Specifications 1 2 Press ?/1 to turn on the power. [. . . ]