User manual SONY RHT-G800

[. . . ] This stand has the following instructions: · To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] To save the power in standby mode Press ?You can program the remote to control non-Sony components following the steps in "Programming the remote for other component" (page 26). Press to activate the Sleep Timer function and the duration which the stand turns off automatically (page 40). Press to operate the TV using the buttons with an orange dot. If you do not press the following button within 60 seconds during registration, the operation will become invalid. ⷠMulti-channel sound is processed by the surround feature in any sound field. Also, multi-channel sound is processed by the surround feature for any sound in "CINEMA" or "SPORTS. You can use the AUDIO DRC function when you want to turn the volume down while still listening to Dolby Digital sound (page 37). If you connect a Sony TV, follow the steps below to program the remote. Check the table below for the remote button number corresponding to the TV input jack you have connected to, and press the number. The input button (TV, DVD/BD, SAT, AUDIO) lights up when you press the number button. Do not use the HDMI control function while the Input SYNC function is active. * TV input jack name may differ depending on your TV model. Press 20 if you do not want to send signals to the TV. Press TV (orange) while holding down the input button (TV, DVD/BD, SAT, AUDIO) for the component you want to operate. The setting is completed after the input button you pressed in step 1 flashes twice. For example, if you are going to operate a DVD player, press DVD/BD. An error has occurred when the input button you pressed in step 1 flashes five times. Press the input button (TV, DVD/BD, SAT, AUDIO) you pressed in step 1. Once the control signals have been memorized, you can use those components as part of your stand. furthermore , you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. [. . . ] Install the stand allowing for a space of at least 30 cm or more on the right and left (page 10). Check that the cords are fully inserted into the jacks on both the component and this stand. Remove any obstacles in the path between the remote and the stand. ⷠReplace both batteries in the remote with new ones, if they are weak. [. . . ]