User manual SONY RM-1000BP

[. . . ] Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This Class B digital apparatus complies with Canadian ICES-003. Disposal of Waste Electrical and Electronic Equipment for business use (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable take-back scheme for the recycling of electrical and electronic equipment. [. . . ] When the video camera is in the auto-adjust recording status, the POWER LED blinks slowly in green. When the remaining tape or battery power is low, the REC LED will blink in red. This unit cannot operate the video camera. oFF (left position): HOLD setting of this unit is cancelled. You can select the control key that can be operated when this unit is set to HOLD. Blinking slowly (red): The remaining capacity of the tape or remaining battery power is low. Blinking rapidly (red): The tape or battery power will run out soon. Blinking (green): The video camera is in the preparation status between the times when the START/STOP button is pressed and when the recording starts correctly. To hide the MENU screen, press this key again. The selected item or number can be changed on the MENU screen or other menu setting screen by moving this lever from right to left or up and down. To confirm or enter the selected item, press the center of this lever. for details , refer to the operating instructions provided with your video camera. Depending on the video camera, moving this lever from right to left may not be possible. The functions assigned to the ASSIGN keys on the video camera are applied by pressing these keys. (PUSH AUTO FOCUS function) During PUSH AUTO FOCUS, if you leave your hand from the dial, auto focus adjustment will be stopped. The direction of rotating the FOCUS dial can be changed by the position of this switch. To return to the original size, press the key again. When using the video camera with a replacement lens, set the focus ring to the electronic control status if you are using the supplied lens. If you are using a lens other than the one that was supplied, this unit may not operate the focus of the video camera. (PUSH AUTO IRIS function) During PUSH AUTO IRIS, if you leave your hand from the dial, auto iris adjustment will be stopped. The direction of rotating the IRIS dial can be changed by the position of this switch. When using the video camera with a replacement lens, set the iris switch of the lens to "auto adjustment (AUTO)". [. . . ] press the each key to check the status of the separate HOLD setting. While you press and hold the key, the REC LED displays the status of the key. Lit (red): The key cannot be operated when this unit is set to HOLD. Lit (green): The key can be operated when this unit is set to HOLD. [. . . ]