User manual SONY RM-AAP022

[. . . ] 3-289-450-45(1) Multi Channel AV Receiver Operating Instructions STR-DG820 ©2008 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Amplifier Operations AUDIO menu parameters x A/V SYNC (Synchronizes audio with video output) Lets you delay the output of audio to minimize the time gap between audio output and visual display. You can adjust from 0 ms to 300 ms in 10 ms steps. Notes • This parameter is useful when you use a large LCD or plasma monitor or a projector. € This parameter is not valid when ANALOG DIRECT is selected. ASSIGN (Digital audio input assignment) Lets you assign the digital audio input to other input source. For details, see “Listening to digital sound from other inputs (DIGITAL ASSIGN)” (page 76). X DUAL MONO (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. € MAIN/SUB Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. € MAIN Sound of the main language will be output. € SUB Sound of the sub language will be output. 53GB Settings for the HDMI (HDMI menu) You can use the HDMI menu to make various adjustments for HDMI settings. select “HDMI” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 42) and “Overview of the menus” (page 43). X SW LEVEL (Subwoofer level for HDMI) Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently. € SW AUTO Automatically sets the level to 0 dB or +10 dB depending on the frequency. € SW 0 dB • SW +10 dB Note This parameter is only available when HDMI input signals are detected. HDMI menu parameters x CTRL:HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off. For details, see “Control for HDMI” (page 70). X AUDIO OUT (Setting HDMI audio input) Lets you set the HDMI audio output from the playback component connected to the receiver via an HDMI connection. € AMP The HDMI audio signals from the playback component are only output to the speakers connected to the receiver. [. . . ] Note that if service personnel changes some parts during repair, these parts may be retained. Reference sections for clearing the receiver’s memory To clear All memorized settings Customized sound fields See page 29 page 63 Error messages If there is a malfunction, the display shows a message. You can check the condition of the system by the message. See the following table to solve the problem. [. . . ]