User manual SONY RM-AV3000T

[. . . ] The RM-AV3000T Remote Commander provides centralized control of all your AV components from a single remote commander and saves the trouble of operating different AV components with different remote control devices. Centralized control of Sony AV components with this one remote commander This Commander is preset at the factory to operate Sony brand components, so you can use it out of the box as a control centre for your Sony AV components. LCD with dot matrix makes label customizing possible. A label of up to 8 letters with digits, characters or symbols can be selected and displayed. [. . . ] " For example, if you always have to change input select of the amplifier to CD when listening to the CD player, programme the signal of "changing the amplifier's input select" to the CD button of this Commander. Then whenever you press the CD button, it automatically works as the original CD Component Select button and changes also the amplifier input select to CD. (In this case, the amplifier should be turned on first. Some specific remote control signals may not be learned. Key (LEARN), press the Component Select button or the Label key you want to "teach, " and release both keys. Example : To programme the input select signal of your amplifier to the CD button Head with your component's remote control. About 2 ­ 4 inches (5 ­ 10 cm) away On the component's remote control (amplifier in this example) until you hear a beep. (If you release the button before you hear a beep, the signal may not be learned correctly. If you keep COMMANDER OFF pressed for more than 2 seconds If you keep COMMANDER OFF pressed for less than 2 seconds Copying the settings of a Component Select button or a Label key to another button or key You can copy the entire settings of a Component Select button or a Label key to another Component Select button or a Label key. The settings of the component code (page 12), the channel macro function (page 58), the learned functions (page 19) and character contents are copied to a new button or key. You cannot copy the settings to a Component Select button or a Label key for which any learning function or channel macro function has been programmed. The character contents are overwritten to a new button or key. To clear the learned function of the Component Select button 1 Follow Steps 2 and 3 on page 20 in "Learning Function. " 2 While pressing the DEL key, press the Component Select button which you want to clear. You can programme a signal by "learning" for a Component Select button or a Label key for which the Power-On function (page 43) has been programmed. In this case, the Power-On function is overwritten and cannot be used. If you clear the "learned" signal from the button, the Power-On function is resumed, and you can use it again. ⷠYou cannot programme a System Control function (page 38) for a Component Select button or a Label key for which a signal has been programmed by "learning. " · You can programme the Power-On function for a Component Select button for which a signal has been programmed by "learning, " but then the Power-On function cannot be used. If you clear a "learned" signal from the button, you can use the Power-On function. Button or the Label button of which contents are to be moved. Once to display "COPY" on one of the Label keys on the display. [. . . ] OK PIP ON/OFF To enter the selection of the MENU display Turn on/off the `window' picture ZOOM­ PIP MOVE PIP STILL PIP OFF ZOOM ZOOM+ 2 +/­ % RED, GREEN, YELLOW, BLUE PIP TEXT Volume up : + Volume down : ­ To mute the volume on the TV Press again to turn muting off Fastext buttons To switch to teletext in the `window' picture To move the location of the `window' picture Freeze the `window' picture. To zoom a picture To scroll upward a picture enlarged by the zoom function To centre the picture enlarged by the zoom function To scroll downward a picture enlarged by the zoom function With Fastext you can access pages with one key stroke. When a Fastext pages with is broadcast, a colour-coded menu will appear at the bottom of the screen. The colours of this menu correspond to the red, green, yellow, and blue keys on the Remote Commander. [. . . ]