User manual SONY RM ED011

[. . . ] Book Page 2 Wednesday, October 1, 2008 10:51 AM NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with a 10 AMP FUSE otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] Buttons for using optional equipment GUIDE 1 m/N/X/M/x: You can operate the BRAVIA Sync-compatible equipment that is connected to the TV. 2 THEATRE You can set Theatre Mode on or off. When Theatre Mode is set to on, the optimum audio output (if the TV is connected with an audio system using an HDMI cable) and picture quality for film-based contents are automatically set. Z If you turn the TV off, Theatre Mode is also turned off. 3 SYNC MENU: Displays the menu of connected HDMI equipment. While viewing other input screens or TV programmes, “HDMI Device 20 GB 010COV. Book Page 21 Wednesday, October 1, 2008 10:51 AM Using MENU Functions Overview of the TV Home Menu (XMB™) The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA TV. Press the HOME button on your remote control to access the XMB™. For details about settings, see page 22. You can also select a channel using the number buttons or PROG +/–. You can also select a channel using the number buttons or PROG +/–. to hide the list of analogue channels , set “Programme List Display” to “Off” (page 28). You can select equipment connected to the TV. to assign a label to an external input , see “AV Preset” (page 27). Analogue External Inputs 3 Press F/f to select the item, then press 4 Follow the instructions on the screen. ~ • The options you can adjust vary depending on the situation. € Unavailable options are greyed out or not displayed. Book Page 22 Wednesday, October 1, 2008 10:51 AM Settings Instruction Manual (Only for KDL-52W4xxx, KDL-46W4xxx, KDL-40W4xxx, KDL-32W4xxx, KDL-40E4xxx, KDL-32E4xxx) Displays contents of Instruction Manual on the screen. Use coloured buttons to move through the screens. press F/f/G/g to select , then press to go to related item or access real application. Picture Picture Mode Selects the picture mode except for PC input source. [. . . ] Only snow and noise appear on the screen (only in analogue mode) • Check if the aerial is broken or bent. € Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Picture or sound noise when viewing a TV channel (only in analogue mode) • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 29). Some tiny black points and/or bright points appear on the screen • The picture of a display unit is composed of pixels. [. . . ]