User manual SONY RM-LJ301

[. . . ] Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. The instructions in this manual are for model RM-LJ301. Check your model number by looking at the lower left corner of the front side. Conventions The following icon is used in this manual: z Indicates hints and tips for making the task easier. [. . . ] When you have selected VCR, the remote is set to control the VCR that corresponds with VCR 1 after you press the MENU button. Before pressing the button, make sure to set the VCR input mode to VCR 1. The BASS BOOST indicator on the receiver lights up when the function is turned on. Table of buttons used to control each component Location of Parts and Basic Remote Operations When you program the remote to control the following Sony or non-Sony components, you can use the buttons on the remote that are marked with circles. Note, however, that some buttons may not operate your component. * For information on the operations that become available when you press the button, see the table on page 9. In this case, only the following buttons are operable: · Location of Parts and Basic Remote Operations Press the SUB button to display a list of operations that the corresponding buttons are not found on the remote. the contents of the lists will vary according to the currently selected component. The following table shows the items in each list and the function of each item. Starts recording Selects the signal to be output from the antenna terminal of the VCR (TV signal or video signal) Selects information displayed on the TV screen Changes the input mode of the VCR Selects the playback speed Toggles between the previous and current channels Selects information displayed on the TV screen Selects the signal to be output from the antenna terminal of the VCR (TV signal or DBS signal) Displays the Favorite Station Guides Displays the Guide Category list Displays the Station Index Displays the Title menu. Displays the Subtitles Changes the Subtitle Language Changes the sounds Changes the search mode Returns to the Continuous Play etc. Selects side A of the disc Selects the side B of the disc Selects information displayed on the TV screen Programs the tracks Repeats current track or programmed tracks Toggles between the previous and current channels Selects information displayed on the TV screen Changes the input mode of the TV Activates the picture-in picture functionc) Changes the position of the small picturec) Swaps the small and large picturesc) Selects the wide-picture moded) Selects preset channels for the small picturec) Selects the FM or AM band Changes the time information Selects a disce) Selects a tracke) Selects Continuous Play Selects Shuffle Play Selects Program Play Selects Repeat Play DISPLAY TV/VTR P IN Pb) POSITIONb) SWAPb) WIDEb) SUB CH +b) SUB CH ­ Tuner VIDEO CD player CD player FM/AM TIME DISC TRACK CONTINUE SHUFFLE PROGRAM REPEAT 3 Move the easy scroll key to select "TITLE" (for the title menu) or "MENU" (for the set up menu), then press the key to enter the selection. 4 Open up the cover on the remote and move the easy scroll key to select "DVD" from the CURSOR TYPE list, then press the key to enter the selection. 3 Move the easy scroll key to select "TITLE" or "MENU, " then press the key to enter the selection. B) These items do not appear if you have assigned TV to the USER 1 (or 2) item in the IR SET list (see page 16) and selected USER 1 (or 2) (see page 14). C) Only with Sony TVs with the picrure-in-picture function. If you have programmed the remote to control non-Sony components, note the following: -- All the items may not appear when you select a component. This chapter describes how to display and use various lists. Press again to revert back to the component information. fUNCTION button: Press to display the function (component) list. Press again to revert back to the component information. sET UP button: Press to display the set up list. [. . . ] Turning the backlight on or off Each time you press a button on the remote, the backlight turns on. If you do the procedure below to turn off the backlight, you can make the batteries last longer. Move the easy scroll key to select "BACK LIGHT, " then press the key to enter the selection. 2 Move the easy scroll key to select "NUMBER" or "ALPHABET, " then press the key to enter the selection. [. . . ]