User manual SONY RM-LVR1

[. . . ] Main Settings Clock 1 2 Press the MENU button to display the setting items. Then select Main Settings Clock Setting. Select the desired date format and then press REC/ENTER button. Y-M-D M-D-Y Year-Month-Day Month-Day-Year Month (in English)-Day-Year Day-Month-Year Y-M-D MENU M(Eng)-D-Y D-M-Y 3 Press the UP button or DOWN button to select the desired date and then press the REC/ENTER button to confirm. Press the MENU button to return to the previous setting. 2014 - 1 - 1 MENU Note When using for the first time or after updating of this unit’s software, the clock setting screen is displayed. Set the clock before using this unit. 3-GB Button hold function This function prevents you from accidentally pressing this unit’s buttons while carrying it around. [. . . ] The automatic exposure setting function is only available with the compatible cameras. Also refer to the compatibility information. Depending on the connected camera model (if it has a mode dial etc. ), the exposure mode may be unchanged. Automatic camera date setting When this unit is connected to a Sony Digital Still Camera QX series model, the date setting of this unit also appears in the camera. Notes The automatic camera date setting function is not compatible with the HDRAS15/AS30V/AS100V. The automatic camera date setting function is only available with the compatible cameras. Also refer to the compatibility information. 7-GB Zooming Depending on the connected camera, the zoom function is enabled during recording. When the Live-View display is on the LCD screen of this unit or during movie recording, you can operate the camera zoom by pressing the UP/DOWN button of this unit. REC ENTER Telephoto (Subject appears closer. ) Wide-angle (Subject appears further away. ) Notes The zoom function is not compatible with the HDR-AS15/AS30V/AS100V. The zoom function is only available with the compatible cameras. Also refer to the compatibility information. 8-GB Warning message Memory card warning indicator If no memory card is inserted into the camera which is connected to this unit by blinks at the top left of the screen. Wi-Fi, REC ENTER Note The memory card warning indicator only appears when this unit is connected to a compatible cameras. Also refer to the compatibility information. 9-GB Multi camera control HDR-AS100V When using the HDR-AS100V, you can operate up to 5 cameras at the same time with this unit. Preparing this unit 1 Select Connection Setting in screen. Network Settings in the MENU 2 Select Multi connection. SINGLE connection Operates one camera with this unit. MULTI connection Operates more than one camera with this unit. Notes The multi camera control function is only available with the compatible cameras. When operating a camera that does not support the multi camera control SINGLE connection. function, set this unit to For more details, refer to the Instruction Manual of the camera and compatibility information. 10-GB Registering a camera on this unit 1 Select in the MENU screen. This unit shifts to registration standby mode. (After about 2 minutes, registration standby mode is cancelled. ) 2 Select [confg] camera. [Wi-Fi] [multi] [NEW] in [SETUP] on the [PREP] blinks on the display of the camera, and preparation for registration starts. 3 When [OK] is displayed on the LCD screen of this unit, press the REC/ENTER button of this unit to confirm registration. When registration is completed, [DONE] appears on the display of the camera and 2 seconds later recording mode is restored. 4 Repeat steps 1 to 3 to register each camera that you want to connect. Notes For more details, refer to the Instruction Manual of the camera. Register cameras before connection standby mode of this unit is cancelled. Once 5 cameras have been connected to this unit, another camera cannot be registered. 11-GB This unit’s LCD screen indicators Recording mode and status of the camera The recording mode and status of the camera is displayed on the LCD screen of this unit. Recording mode/Status Photo shooting mode Movie recording mode Interval photo recording mode Connected Displayed icon The position of the cursor indicates the camera currently displaying in the Live-View. While the connected camera is recording, is displayed on the icon. The status is displayed, such as transmitting or connection being processed. 12-GB Error display Error icon An error icon is displayed on the LCD screen of this unit according to the status of the connected camera. [. . . ] To stop recording movies or interval photo recording, press the REC/ENTER button of this unit again. REC REC REC Notes The operation command from this unit when under multi camera control is sent to all connected cameras. Change the recording mode Start and stop movie recording and interval photo recording Operate the shutter to shoot photos Other camera settings such as image quality etc. The reaction time of the connected cameras may differ depending on the situation of each camera. There may be a time lag between the connected cameras when starting recording etc. [. . . ]