User manual SONY RM-TP501E

[. . . ] Discard used batteries according to the manufacturer's instructions. on operation Before connecting other components, be sure to turn off and unplug the amplifier. The following icon is used in this manual: z Indicates hints and tips for making the task easier. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. [. . . ] Touch the disc number to start playing that disc. Use the JOG DIAL or touch 4 or $ to scroll up or down the list. â· Touch NUMBER to sort in numerical order or touch TITLE to sort in alphabetical order. â· Touch FUNCTION to return to the FUNCTION screen at any time. Z When the song number or song title is not displayed correctly Point the commander toward the amplifier and touch RELOAD. This section describes how record audio from a CD to an MD as an example of recording audio/video. For details on the buttons used in recording, refer to the operating instructions supplied with the amplifier and other components. Touch to select the recorder component (MD/DAT in this example). Starts playback from the CD player Touch to select the player component (CD in this example). Because CD is not displayed, use the JOG DIAL or touch $ to scroll downward through the list. If you scroll to far, touch 4 to scroll back up. To stop recording at any time Although recording stops automatically in the above example, recording can also be stopped at any time by touching p in RECORDER. These sections describe how to select and make adjustments to the sound fields. For details concerning sound fields, please refer to the operating instructions supplied with the amplifier. For details concerning which sound fields can be selected, please refer to the amplifier's operating instructions. Touch EQ OFF to turn the amplifier's equalizer off. Use JOG DIAL or touch 4 or $ to scroll through the list. Push JOG DIAL to select the highlighted sound field or touch the sound field you desire. A check ( ) will appear next to the selected sound field, and the sound field will change. Set up the SOUND FIELD screen menus to fully enjoy the surround sound created by the sound fields. Set speaker configuration, size and distance from the main listening position on the SP SETUP screen. On the EQ EDIT screen, adjust the frequency bands of front, center and rear speakers of the equalizer preset (EQ PRESET 1-5) that you selected on the EQ BANK screen. [. . . ] ) on it, or placing heavy objects on top of it, may break the touch panel and cause bodily harm due to glass fragments. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use solvent such as thinner, benzine, or alcohol as these will damage the surface of the commander. If you experience any of the following difficulties while using the commander, use this troubleshooting guide to help you remedy the problem. [. . . ]