User manual SONY RM-U401

[. . . ] If the component does not turn on, press the power switch on the component. To select VCR 2 AV 1u switch / Press to turn the audio and video components on or off. 3 SYSTEM STANDBY switch Press to turn off the receiver and other audio/video components at the same time. 4 MASTER VOLUME +/­ buttons Press to adjust the volume level of all speakers at the same time. [. . . ] When inputting a channel, disc, or track number, 0 selects 10. !¶ CH/PRESET +/­ buttons Press repeatedly to select a preset station or channel. !· CURSOR MODE button Press this button repeatedly to select any of the following three cursor modes. The indicator for the selected cursor mode lights up to the left of the display window on the receiver. The indicator turns off when you press the SET UP button on the receiver. When the cursor mode is You can SURROUND BASS/TREBLE or EQ Change the delay time and the effect level Adjust the tone (bass/treble) of the front speakers. Press the EQ/ TONE ON/OFF button to activate the tone effect. Enter an index name for a preset station or program source p VCR, DVD player, Stops play LD player, tape deck, MD deck, CD player, DAT deck Skips tracks VCR, DVD player, LD player, tape deck, MD deck, CD player, DAT deck VCR, LD player, tape Fastwinds or rewinds deck, MD deck, DAT deck DVD player, CD player Searches tracks in the forward or backward direction Sets the tape deck in recording standby Starts recording. You can press 9 for the tape deck or DAT deck instead of (. Selects a disc (CD player with a multi-disc changer only) Skips a disc (CD player with a multi-disc changer only) =/+ 0/) r VCR, tape deck, MD deck, DAT deck VCR, Tape deck, DAT deck r + ( (if pressed together) DISC CD player D. SKIP CD player INDEX See the table on page 10 for information on the buttons that you can use to control each component. Note The CURSOR MODE button does not operate on receivers that have no cursor buttons. 7 Parts Description @º TV CONTROL button If you are using a Sony TV, you can use this remote to operate the TV without turning on the receiver. When you press this button, the TV turns on and switches to TV input. DVD MENU EXECUTE ENTER VCR MENU @¢ @§ @¶ @¡ DBS MENU CURSOR MODE @£ @· @ @¡ TV/VIDEO button Press to change the input mode of the TV. P IN P button Press to activate the picture-in-picture function*. SWAP button Press to swap the small and large pictures*. POSITION button Press to change the position of the small picture*. JUMP button Press to toggle between the previous and the current channels. Location of Parts and Basic Remote Operations DBS DVD GUIDE EXIT/RETURN TITLE TV/VIDEO EFFECT/ DELAY EQ/TONE ON/OFF TEST TONE P IN P SWAP LEVEL + REAR + CENTER POSITION TV JUMP ­ ­ V SLEEP Lift up the top cover. 1/u AV SYSTEM STANDBY * Only with Sony TVs with the picture-in-picture function. 1 4 7 >10 - / - SHIFT 2 5 8 0 3 6 9 ENTER D. TUNING @TM ANT TV/VTR button Press repeatedly to select the signal to be output from the antenna terminal of the VCR (TV signal or video signal). @£ VCR MENU button Press to display the VCR menu on the TV screen. Then use the cursor buttons on the remote to perform the menu operations (see "@· Cursor buttons (V/v/ B/b), ENTER button, and EXIT/RETURN button" on page 9). Note 9 = DISC ( + D. SKIP P 0 ANT TV/VTR p ) r @TM @º VIDEO1 TV TUNER VIDEO2 TAPE PHONO VIDEO3 MD 5. 1 IN DVD CD TV CONTROL SOUND FIELD ON/OFF GENRE MODE BASS BOOST MASTER VOLUME CH/PRESET After you press the VCR MENU button, the remote is set to control the VCR that corresponds with VCR 1. Before pressing the button, make sure to set the VCR input mode to VCR 1. MUTING ++ ­­ 8 @¢ DVD MENU button Press to display the DVD menu. [. . . ] To reset all function buttons to their factory settings First press down MASTER VOLUME ­, then AV 1/u, and then SYSTEM STANDBY. 12 Additional Information Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. / Point the remote at the remote sensor g on the receiver. / Remove any obstacles in the path between the remote and the receiver. [. . . ]