User manual SONY RM-VL1000T

[. . . ] The RM-VL1000T Remote Commander provides centralized control of all your AV components from a single remote commander and saves the trouble of operating different AV components with different remote control devices. Centralized control of Sony AV components with this one remote commander LCD with dot matrix makes label customizing possible. A label of up to 8 letters with digits, characters or symbols can be selected and displayed. This Commander is preset at the factory to operate Sony brand components, so you can use it out of the box as a control centre for your Sony AV components. [. . . ] Which System Control function you want to erase by pressing the Label Select button. The programmed commands are executed when you select a component label by pressing the Label Select button for more than a second. When you press the Label Select button for less than a second, the selected label works as the normal component label, and the corresponding function labels are displayed. When erasing finishes, "COMPLETE" is displayed with a beep sound. If you want to erase the settings of other macro numbers With a beep sound, a series of operating commands is registered. In Step 2 (page 41), while pressing the Label Select button corresponding to the label that you want to erase, press the SCROLL button. (The labels for which a series of commands is programmed stay lit. ) "CLEAR OK" appears and the component macro is cleared with a beep sound. The cleared label flashes together with other labels for which a series of commands is not programmed. note When you select the label for which a series of commands is programmed, the `NG' sound is heard. If you release the Label Select button then, data is not cleared and the component macro signal is transmitted. The labels for which a series of commands is programmed stay lit and others flash. Which you want to programme a series of commands by pressing the Label Select button (for example, DVD). You can control the interval from 150- 900 ms. With a beep sound, the setting is changed. With a beep sound, the setting is changed. When using Sony components, you can programme the Power-On signal for each component on a component label. You can select the desired component and turn it on by just selecting that label after pressing the COMPO button. The display of the component names (preset by Sony) for which you can programme the Power-on signal flashes. To clear the Power-On command A beep sound is heard, and "OFF" lights. A beep sound is heard, and "ON" lights. If you select a component for which the Power-on signal cannot be programmed "NG" appears and the `NG' sound is heard twice. [. . . ] (For example, you programme the power-on setting, assuming that power of the component is off when the timer turns on. However, if power of the component is on when the component receives the timer signal from the Commander, the component will turn off. ) The timer programme is · The timer programme contents you have set on this executed in the next Commander repeat weekly or daily. If you want to execute week or on the next day the timer programme once, set the timer standby mode to off though that programme after the execution of the timer programme (page 58). [. . . ]