User manual SONY RM-VL1400T

[. . . ] Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. [. . . ] You can set A/V components to turn on when they are selected. This function is effective only for Sony components. A beep sounds and "TV ON" appears in the third line of the screen. A beep sounds and "TV OFF" appears in the third line of the screen, and the setting will be cancelled. The power-on function can be programmed on the COMPONENT select button or Label select button on which a Component Macro has been programmed (page 18). In this case, the A/V component will be turned on when you press the COMPONENT select button or Label select button. If you press and hold the button for over 2 seconds, the programmed Component Macro will be executed. You can programme the power-on function on a COMPONENT select button or Label select button on which a remote control signal was programmed using the Learning function (page 12). In this case, the learned signal will be transmitted when you press the COMPONENT select button or Label select button, then the A/V component will be turned on. You can programme the power-on function on a COMPONENT select button or Label select button on which a learned signal (page 12) and a Component Macro (page 18) are programmed. In this case, the learned signal will be transmitted when you press the COMPONENT select button or Label select button, then the A/V component will be turned on. If you press and hold the button for over 2 seconds, the programmed Component Macro will be executed. If a number is displayed before the menu, you can select the menu by pressing the number button. If a number is displayed before the menu, you can select the menu by pressing the number button. You can copy the entire settings of a COMPONENT select button or Label select button to another COMPONENT select button or Label select button. You cannot copy the settings to a COMPONENT select button or Label select button on which any "learned" function (page 12) or Component Macro (page 18) has been programmed or A/V component's name or label has been changed. If a number is displayed before the menu, you can select the menu by pressing the number button. A beep sounds and "TV >> MD" appears in the second line of the screen. If a number is displayed before the menu, you can select the menu by pressing the number button. The volume control buttons (2 +/- and %) of the Remote Commander are factory preset to control the volume based on the assumption that you hear the sound of your visual components from your TV speakers, and that you hear sound of your audio components from the loudspeakers connected to your amplifier. For example, to control the volume while using a DVD player, you do not need to select the TV to control the TV volume. If a number is displayed before the menu, you can select the menu by pressing the number button. [. . . ] Therefore, when another brand's AV component is set, the function of a button may differ from its name. Refer to the following tables for each button function. Function To turn the power on/off To change the input mode To change the programme. Press again to return to the previous volume level. [. . . ]