User manual SONY RM-XM10B

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] For more information about the functions of each button or control, refer to the operating instructions of your Sony car audio equipment. 1 VOL (volume) + ­ button 2 ATT (attenuate) button Press to attenuate the sound momentarily. 3 SOURCE button Press to select program sources. 4 SEEK/AMS button During tape or CD/MD playback: ·AMS* function: Locates the beginning of tracks. Each time you press either side of the button a track is skipped. To skip several tracks at once, press either side of the button momentarily and release. Within one second, press it again and hold it. * Automatic Music Sensor. 2 4 3 1 or 2 9 5 Connection ·Manual search: Locates the desired part of a track. Press and hold either side of the button until the desired part is located. When the desired track is reached, release. During radio/TV reception: ·Automatic tuning: Automatically tunes in to a station. When a station is tuned in, the search stops automatically. Press either side of the button momentarily several times until a desired station is tuned in. [. . . ] · When finished making all the connections, press the RESET button of the master unit. · When you connect the remote commander to the master unit and other units (CD/MD changer etc. ), refer also to the Installation/Connections manual of the master unit and other units. [. . . ]