Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY SA-VE556H. We hope that this SONY SA-VE556H user guide will be useful to you.
Lastmanuals help download the user guide SONY SA-VE556H.
Detailed instructions for use are in the User's Guide.
[. . . ] You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. To prevent speaker vibration or movement while listening, attach the supplied foot pads to the bottom four corners of the front speakers, surround speakers and surround back speaker. Use the supplied center speaker stand at the bottom of the center speaker (D). [. . . ] See the table below for the proper settings. There is no sound from the speaker system. Make sure the volume on the amplifier has been turned up properly. Make sure the program source selector on the amplifier is set to the proper source. There is distortion in the subwoofer sound output. There is hum or noise in the speaker output. Make sure none of the audio components are positioned too close to the TV set. Contact between bare speaker wires at the speaker terminals may cause a short-circuit. Do not drive the speaker system with a continuous wattage exceeding the maximum input power of the system. If the polarity of the speaker connections are not correct, the bass tones will be weak and the position of the various instruments obscure. Contact between bare speaker wires at the speaker terminals may result in a short-circuit. Before connecting, turn off the amplifier to avoid damaging the speaker system. The volume level should not be turned up to the point of distortion. If you use the amplifier with adjustable crossover frequency, it is recommended to select 150 Hz (or close to this figure) as the crossover frequency for your front, center, and surround speakers. Speaker system Speaker units Enclosure type Rated impedance Power handling capacity Maximum input power: Sensitivity level Frequency range Dimensions (w/h/d) Mass 2 way, magnetically shielded Woofer: 9 cm Tweeter: 2 cm Bass reflex 8 ohms 140 watts 84 dB (1 W, 1 m) 100 Hz - 50, 000 Hz Approx. This speaker system is magnetically shielded to allow it to be installed near a TV set. [. . . ] Rotate BASS-BOOST according to the output level that you prefer. Some material is recorded with strong emphasis on bass sounds, which may be accessive in some cases. If this happens, rotate BASS-BOOST towards minimum. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SA-VE556H
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SA-VE556H will begin.
