User manual SONY SAL-14TC

[. . . ] Keep the lens out of reach of small children. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] · Do not use any organic solvent, such as thinner or benzine, to clean the teleconverter. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Compatible Lenses and Functions This teleconverter is designed exclusively for use with the lenses listed below. Do not attach other lenses, otherwise the teleconverter or lens may be damaged. How to read the table AF: MF: Auto focus Manual focus. The viewfinder focus indicator is lit when the subject is in focus. 1. 4X Teleconverter 70-200mm F2. 8 G (SAL70200G) 300mm F2. 8 G (SAL300F28G) 135mm F2. 8 [T4. 5] STF (SAL135F28) AF AF MF MF 2X Teleconverter AF AF MF MF NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. MF* MF* For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003. * The viewfinder focus indicator does not work. Focus manually, monitoring the subject. Names of parts 1···Lens contacts* 2···Lens mounting index 3···Lens release 4···Mounting index for camera body 5··· mount · Always attach the lens to the teleconverter before attaching the teleconverter to the camera. Attaching them in reverse order may result in incorrect metering. · Do not use more than one teleconverter with a lens. [. . . ] Use focus lock on high contrast subject or manual focus. · Do not press the lens release on the teleconverter when mounting the lens. · Do not insert the lens at an angle. 3 Align the mounting index for camera body on the teleconverter with the orange index on the camera. Insert the teleconverter into the camera mount and turn it clockwise until it locks into place. · Do not press the lens release button on the camera when mounting the teleconverter. [. . . ]