User manual SONY SA-TA3

[. . . ] THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. This product must not be exposed to dripping or splashing liquids. Objects filled with liquids, such as a vase, must not be placed on or above the product. NOTE TO CABLE/TV/SATELLITE DISH INSTALLER: This reminder is provided to call the cable TV system/satellite dish installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). [. . . ] If you already have a dish, refer to its user's guide to determine its type. To receive all available HD programming, you should install and select the Oval dish type (Oval dish (Sat A, B, C)). The Auto Detection feature will help you select your dish if you are unsure of your dish type. If you are not a DIRECTV customer and want to view programming only from Antenna/Cable, then select the No Dish Mode. 68 8. Initializing the System To Select your dish type in Manual Selection: 1. Press the MENU button on the Remote Control to display the on-screen menu. Select the DIRECTV® menu by pressing " 3. Scroll down to Initial Setup using "E". Move the highlight to the right with "G " to choose Setup Wizard. Select the Manual Selection option and press " ". In the Manual Selection screen, select your dish type using "D", "E". After this Channel Setup process, the channel list of over the air stations will be added to the guide. If you want to add over the air digital and analog channels to your guide, select "YES". Note: If you select "NO", you don't need to do the following process. Press " " if your ZIP code is correct for the primary local channels. The channel search progress will be shown. If the ZIP code is missing or incorrect, select the ZIP code for your city using "E"and pressing " ". 4. If you want to add secondary local channels from another area, enter a secondary ZIP code using the digit buttons on the remote control and press " ". Press " " to move to the next step of the initial setup. 7. Press "F " to return to the previous level or press the EXIT button on the remote control if you want to return to TV viewing. Note : The Add Local Network feature only adds station and program information to the guide. Depending on your location, such stations may be received by connecting an antenna to the ANT IN jack (see section 3-4). [. . . ] Sony's affiliates and/or third party suppliers may protect their rights directly in the event of any User's violation of this Agreement. The trademarks, tradenames, Product designation, logos and service marks ("Marks") displayed with this Software are the property of Sony, its affiliates or third party licensors, and User shall acquire no rights of any kind in or to any Mark under which the Software and/ or Products are marketed. User is not permitted to use these Marks without the prior written consent of Sony, its affiliates or the applicable third party licensor which may own the Mark. "Sony" is a registered trademark of Sony Corporation. [. . . ]