User manual SONY SCD-CE775

[. . . ] 4-233-315-12(1) Super Audio CD Player Operating Instructions SCD-CE775 2001 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the United States Owner's Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. _________________________ Welcome! Thank you for purchasing the Sony Super Audio CD Player. [. . . ] "REPEAT" appears in the display and Repeat All Play starts. The repeat play changes depending on the play mode you select. When the play mode is ALL DISCS Continuous Play (page 11) The player repeats All the tracks on all discs All the tracks on the current disc All the tracks on all discs in random orders All the tracks on the current disc in random orders All the tracks in the program in sequence REPEAT 1 DISC Continuous Play (page 11) ALL DISCS Shuffle Play (page 19) 1 DISC Shuffle Play (page 19) Program Play (page 20) Playing Discs REPEAT H x To stop Repeat All Play Press x. To resume normal play Press REPEAT repeatedly until "REPEAT" goes off. Repeating the current track (Repeat 1 Play) While the track you want to repeat is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. Repeat 1 Play starts. Note If you turn off the player or disconnect the power cord, the player will store the last setting of repeat play ("REPEAT" or "REPEAT 1") and recall it the next time you turn on the player. To stop Repeat 1 Play Press x. To resume normal play Press REPEAT repeatedly until "REPEAT 1" goes off. 18 Playing Tracks in Random Order (Shuffle Play) You can have the player "shuffle" tracks and play in a random order. The player shuffles all the tracks on all discs or one disc you've specified. DISC 1­5 N lAMSL Shuffle Play on one disc You can play all tracks on the specific disc in a random order. 1 2 Press SHUFFLE repeatedly until "1 DISC" appears in the display. Press DISC 1­5 to start 1 DISC Shuffle Play on the selected disc. ";" appears while the player is "shuffling" the tracks. The player will stop after playing all the tracks once. CONTINUE SHUFFLE To resume normal play Press CONTINUE. CONTINUE SHUFFLE Playing Discs z You can locate tracks during Shuffle Play Turn lAMSL or press . />. The player does not go back to tracks which have already been played. z You can start Shuffle Play while playing Press SHUFFLE, and Shuffle Play starts from the current track. H . /> Shuffle Play on all discs You can play all tracks on all discs in a random order. 1 2 Press SHUFFLE repeatedly until "ALL DISCS" appears in the display. Press H to start ALL DISCS Shuffle Play. ";" appears while the player is "shuffling" the tracks. The player will stop after playing all the tracks once. 19 Creating Your Own Program (Program Play) You can pick out the tracks that you like and specify the playback order in a program containing up to 32 tracks. To resume normal play Press CONTINUE. z You can create your program while checking the disc labels While the disc tray is open, follow Steps 1 to 8 with pressing the DISC SKIP button to check the disc labels. Note that, if the programmed track number isn't found on the disc, that step is automatically erased. CONTINUE DISC Number buttons PROGRAM z The program remains even after Program Play ends Press H to play from the beginning of the program again. The program remains even if you stop play. ENTER CLEAR >10 CHECK H z The program remains until you erase it If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren't found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. Playing Discs . /> Note If you turn off the player, disconnect the power cord, or press A OPEN/CLOSE the program will be erased. Checking the contents of the program 1 2 3 4 Press PROGRAM in stop mode. "PROGRAM" appears in the display. The selected disc number appears in the display. When you want to program the whole disc as one step, skip Steps 5 to 6, and go to Step 7. [. . . ] · Do not use solvents such as benzine, thinner, record cleaners, or anti-static spray. Additional Information Notes on CD-R/CD-RW playback · Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition, or the drive's characteristics. Besides, the discs, which are not yet finalized at the end of recording, cannot be played back. 28 Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. , Check that the player is connected securely. [. . . ]