User manual SONY SCD-X501ES

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] When the player detects a Multi-channel Super Audio CD, the channel information appears for a few seconds after the track title appears. Playing time of the current track Before you start playing press TIME/TEXT repeatedly. Each time you press the button, the disc name or artist name appears on the display. When Shuffle Play is selected, the player will play all the tracks on the disc in random order. You can pick out the tracks that you like and specify the playback order in a program containing up to 32 steps (or 999 min. ";" appears while the player is "shuffling" the tracks. The player will stop after playing all the tracks once. If you entered the wrong track number The player does not go back to tracks which have already been played. If you turn off the player or disconnected the power cord, Shuffle Play is canceled. Then repeat Steps 2 and 3 to enter the correct track number. Repeat Steps 2 through 3 to enter other tracks. Each time you enter a track number, the total number of program steps appears on the display. Press H to play from the beginning of the program again. This player is equipped with a Multi-channel management function that sets the playback mode of the Super Audio CD by the DSD-DSP (built into the player) according to the layout or size of your speaker. If you turn off the player, disconnect the power cord, press A on the player, or switch the playback layer or area, the program will be erased. If you switch the playback layer or area during Program Play, a single track only will be played back from its beginning, and then the program will be erased. Before you start playing or while the player is playing, press CHECK on the remote repeatedly. Each time you press the button, the track numbers will appear on the display in the programed order. If you press CHECK on the remote while the player is playing, the programed track numbers will appear starting with the currently playing program step. To set the Multi-channel management function, select the appropriate preset playback mode (2 channel mode or Multi-channel mode), and then adjust the output level balance for each speaker (only in the case of Multi-channel mode). Repeatedly until the track number you want to erase appears. This features only work when you play the Super Audio CD. [. . . ] There is no sound from the SUB WOOFER jack. Select a playback mode in which the sub woofer signal is output from the SUB WOOFER jack. The mode indication is displayed with "+ SW" (page 18) when such a mode is selected. When you play a track that does not contain the LFE signal, the signal outputs from the SUB WOOFER jack only when you select "5­ SMALL+SW" or "F­LARGE+SW" for Multichannel mode (page 18). [. . . ]