User manual SONY SCD-XA1200ES

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] When you resume play, the display turns off again. Before you start playing, when you press DISPLAY MODE to turn off the display, "DISP OFF" appears, and when you press the button to turn on the display, "DISP ON" appears. You can locate a particular point in a track during play or play pause. While monitoring the Press and hold m/M sound (Search) during play. 2 Press and hold m/M to set the time to start play while looking at the display, then press N. Repeatedly until the track number you want to erase appears. Repeat Steps 2 through 3 to enter other tracks. Each time you enter a track number, the total number of program steps appears in the display. Erase from the last track in the program Each time you press the button, the last track of the program is erased. Add a track to the Perform Steps 2 through 3. End of the program Erase all tracks Hold down CLEAR on the remote or x (for about 2 seconds) until "PGM CLEAR" appears in the display. Press N to play from the beginning of the program again. If you turn off the player, disconnect the power cord, press A on the player, or switch the playback layer or area, the program will be erased. If you switch the playback layer or area during Program Play, a single track only will be played back from its beginning, and then the program will be erased. This player is equipped with a Multi-channel management function that sets the playback mode of the Super Audio CD by the DSD-DSP (built into the player) according to the layout or size of your speaker. To set the Multi-channel management function, select the appropriate preset playback mode (2 channel mode or Multi-channel mode), and then adjust the output level balance for each speaker (only in the case of Multi-channel mode). This features only work when you play the Super Audio CD. You may not be able to adjust the output level balance depending on the speaker layout mode that you selected. If you select "S" for the surround speakers, the bass frequencies will come from the front speakers and/or sub woofer. If the sound is noisy or the Multi-channel playback is not effective while playing a Multi-channel Super Audio CD, change the settings of the speakers concerned to "S". Adjusting the output level balance of each speaker You can adjust the following items in the case of Multi-channel mode: SURR BAL The relative output level balance between the front speakers (FRONT L/R) and the surround speakers (SURR L/R) CNTR BAL The relative output level balance between the front speakers (FRONT L/R) and the center speaker (CENTER) SW BAL The relative output level balance between the front speakers (FRONT L/R) and the sub woofer (SUB WOOFER) The Multi-channel management function does not work when you select "Mch DIRECT" (you cannot set the output level balance of each speaker). The front speaker setting is set to "L" automatically when you set the sub woofer to "­­". [. . . ] Select a playback mode in which the sub woofer signal is output from the SUB WOOFER jack. The mode indication is displayed with "+ SW" (page 16) when such a mode is selected. When you play a track that does not contain the LFE signal, the signal outputs from the SUB WOOFER jack only when you select "5­ SMALL+SW" or "F­LARGE+SW" for Multichannel mode (page 16). A disc cannot be ejected and "LOCKED" appears in the front panel display. [. . . ]