User manual SONY SCD-XA777ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This label is located on the left exterior. Before operating the unit, please read this manual thoroughly and retain it for future reference. The model and serial numbers are located at the rear of the unit. [. . . ] To play track number 100, press >10 twice, then 1, and 10/0 twice. Some SACD or CD are provided with an index marking system which divides tracks or discs into smaller segments. This is especially useful when you want to locate a certain point within a long track (in classical music for example). The index search function works only when you use a commercially available indexed discs (usually indicated on the label). You can play an entire disc or portions thereof repeatedly. This function can be used with Shuffle Play to repeat all the tracks in random order (page 20), or with Program Play to repeat all the tracks in a program (page 21). You can also repeat a specific track or portion within a track. Press and hold m/M to set the time to start play while looking at the display. You can set the time from the beginning of the desired track when you press M at first, and set the time from the end of the desired track backward's when you press m at first. If you turn off the player or disconnect the mains lead, the player will store the last setting of repeat play ("Repeat All" or "Repeat 1") and recall it the next time you turn on the player. However, the setting of the Repeat A-B Play will be cancelled if you turn off the player or disconnect the mains lead. "REPEAT" appears in the display and Repeat All Play starts. The repeat play changes depending on the play mode you select. When the play mode is To resume normal play Press REPEAT repeatedly until "REPEAT" goes off. When you select Shuffle Play, the player plays all the tracks on the disc in random order. While the track you want to repeat is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. To resume normal play Press REPEAT repeatedly until "REPEAT 1" goes off. Repeating a specific portion within a track (Repeat A-B Play) You can specify one portion within a track to be played repeatedly. Note that the portion that you specify must be within the boundaries of a single track. While the player is playing, press AyB at the starting point (point A) of the portion to be played repeatedly. "REPEAT" appears and "A" flashes in the display. Continue playing the track (or press M) to locate the ending point (point B), then press AyB. [. . . ] If the disc is dirty with fingerprints or dust, it may lessen the quality of the audio out. Before playing, clean the disc with a cleaning cloth. Clean the disc with a soft cloth slightly moistened with water, and remove moisture with a dry cloth. Do not use solvents such as benzine, thinner, record cleaners, or anti-static spray. [. . . ]